Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Techniques For Reloading


Reply

270WSM/140grAccubond with RL-19?

 
LinkBack Thread Tools Display Modes
  #1  
Old 04-02-2010, 05:56 PM
Platinum Member
 
Join Date: Dec 2009
Location: Redmond Or.
Posts: 2,527
270WSM/140grAccubond with RL-19?

Hey guys, I did a search and only found 1 load for the 140gr Nosler Accubond using RL-19 for my 270WSM. Any body got any load data using RL-19(1st choice) or IMR4831(2nd choice) with this bullet? I consulted my Hornady book, and studied up on the burnrate charts, and I think 61gr of RL-19 would be ok for a starter load, going up in 1/2 gr incriments. But my book only gives data for Hornady bullets.

RL-19 and IMR 4831 are the only 2 powders I have at the moment.
I dont want to do anything stupid, so if you have any data with either of these 2 powders with 140Accubonds, in a 270wsm, Id sure appreciate it.
Thanks
__________________
"Its not Rocket Surgery.....'
GOD,GUNS,&GUTTS MADE AMERICA, LETS KEEP ALL 3!winmag

"I have No idea why that cop made me ride in the back seat, when I Clearly called Shotgun!"
Reply With Quote
  #2  
Old 04-02-2010, 08:09 PM
Gold Member
 
Join Date: May 2006
Location: Oklahoma City Ok
Posts: 505
Re: 270WSM/140grAccubond with RL-19?

Quote:
Originally Posted by winmag View Post
Hey guys, I did a search and only found 1 load for the 140gr Nosler Accubond using RL-19 for my 270WSM. Any body got any load data using RL-19(1st choice) or IMR4831(2nd choice) with this bullet? I consulted my Hornady book, and studied up on the burnrate charts, and I think 61gr of RL-19 would be ok for a starter load, going up in 1/2 gr incriments. But my book only gives data for Hornady bullets.

RL-19 and IMR 4831 are the only 2 powders I have at the moment.
I dont want to do anything stupid, so if you have any data with either of these 2 powders with 140Accubonds, in a 270wsm, Id sure appreciate it.
Thanks
Get off the lands about .030 and load up the min, middle, and max as per the link below with 3 rounds each while using fed 215's(min, middle, and max) and cci's 250(min, middle, and max) and see what happens!!!!


Nosler: bullets, ammunition, rifles, brass, and reloading data.
Reply With Quote
  #3  
Old 04-02-2010, 08:41 PM
Platinum Member
 
Join Date: Dec 2009
Location: Redmond Or.
Posts: 2,527
Re: 270WSM/140grAccubond with RL-19?

THANK YOU POPAPI! I very much appreciate that. I drove by Nosler tonight after taking my wife to Red Robin for her birthday dinner, but they were closed.
She started to get onto me for taking her to Bend............and winding up only a couple blocks away from Nosler, but I played it off like a pro..........I hered they were over this way dear, I just wanted to see for myself on our way home.....

Ive had great success with Hornady SST's, but I shot 450yds a week ago or so, and out of 24 rounds fired, I only recovered two. The problemb was that both had complete core/jackett seperation! Ive never had this problemb with a bonded bullett, and Nosler is just down the road so.........Accubond it is.....I hope. Ill be thrilled if my rifle likes them as much as it liked the SST.
Thanks again! Now I can load this weekend after church!! Happy Easter early!
__________________
"Its not Rocket Surgery.....'
GOD,GUNS,&GUTTS MADE AMERICA, LETS KEEP ALL 3!winmag

"I have No idea why that cop made me ride in the back seat, when I Clearly called Shotgun!"
Reply With Quote
  #4  
Old 04-02-2010, 09:21 PM
Platinum Member
 
Join Date: Nov 2008
Location: SW Montana
Posts: 4,457
Re: 270WSM/140grAccubond with RL-19?

I haven't use those powders but the 140 Accubond is a shooter, the only bullet I've gotten to shoot as good is the 140 Berger. My dad refers to it as the Accubomb cause of how hard it hits.
__________________
High Fence, Low Fence, Stuck in the Fence, if I can Tag it and Eat it, it's Hunting!

"Pain is weakness leaving your body"
Reply With Quote
  #5  
Old 04-02-2010, 09:31 PM
Bronze Member
 
Join Date: Feb 2008
Location: Kennewick,Wa.
Posts: 61
Re: 270WSM/140grAccubond with RL-19?

My load for my 270wsm
Winchester cases
Winchester Large Rifle Mag. primer.
67.5grs. of Accurate Arms MagPro powder.
140gr. Nosler Accubond bullet.
It shoots 1/2" group at 100yds. and flat hammers Mule deer.
Reply With Quote
  #6  
Old 04-03-2010, 12:16 AM
Gold Member
 
Join Date: May 2006
Location: Oklahoma City Ok
Posts: 505
Re: 270WSM/140grAccubond with RL-19?

Quote:
Originally Posted by winmag View Post
THANK YOU POPAPI! I very much appreciate that. I drove by Nosler tonight after taking my wife to Red Robin for her birthday dinner, but they were closed.
She started to get onto me for taking her to Bend............and winding up only a couple blocks away from Nosler, but I played it off like a pro..........I hered they were over this way dear, I just wanted to see for myself on our way home.....

Ive had great success with Hornady SST's, but I shot 450yds a week ago or so, and out of 24 rounds fired, I only recovered two. The problemb was that both had complete core/jackett seperation! Ive never had this problemb with a bonded bullett, and Nosler is just down the road so.........Accubond it is.....I hope. Ill be thrilled if my rifle likes them as much as it liked the SST.
Thanks again! Now I can load this weekend after church!! Happy Easter early!
Ur welcome Win!!!! Happy Easter to you and yours as well, get back with us after you load these dudes up!!!! Mine shot well with the 130 ABond with RL19 with the middle load and fed215GM's and the max load with CCI 250!!!!!!
Reply With Quote
  #7  
Old 04-05-2010, 07:14 AM
Silver Member
 
Join Date: Aug 2008
Location: Houston, Tx
Posts: 182
Re: 270WSM/140grAccubond with RL-19?

WinMag, 7mmx 300wsm mountain rifle with 130 X Bullet using RL19. After much testing, my loads and accuracy have shown that 68 gr RL19 is the most useful and accurate load. Primers are Fed large rifle. Have not crono'd the loads. Accuracy is more important than speed. RL17 and IMR 4007 ssc are next on my list in the quest of accuracy and speed. This load was incrementalized .2 of a grain , a slow process in uncharted waters.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: 270WSM/140grAccubond with RL-19?
Thread Thread Starter Forum Replies Last Post
Re#25 and the 270WSM Iron Worker Reloading 11 04-26-2010 09:17 PM
110 V-Max out of 270WSM Iron Worker Reloading 3 04-11-2010 05:17 PM
Rem xcr 700-270wsm Dbumpo Guns For Sale 3 11-17-2009 04:10 PM
270wsm JWR07 Reloading 2 11-09-2009 11:03 AM
6.5-270wsm DUST_U Rifles, Bullets, Barrels and Ballistics 5 08-30-2009 09:06 PM

Current Poll
Do you archery hunt for elk?
YES - 32.00%
72 Votes
NO - 51.11%
115 Votes
Not yet, but I plan to. - 16.89%
38 Votes
Total Votes: 225
You may not vote on this poll.

All times are GMT -5. The time now is 01:21 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC