close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets

Reply

.270Win Chamber too small

LinkBack Thread Tools Display Modes
  #22  
Unread 10-02-2009, 01:35 PM
Platinum Member
 
Join Date: Nov 2005
Location: Texas
Posts: 1,845
Re: .270Win Chamber too small

Hope this helps-----from a post I did a while back on this same question:

When I lube cases, it is very simple:

--place cases in a wooden loading block skipping every other hole

--Spray lube (I use Hornady) at an angle so you are getting some into the inside of the neck using even strokes and consistent distance from the cases

--turn block 90 degrees and repeat

--turn block 90 degrees and repeat

--turn block 90 degrees and repeat

--turn block 90 degrees and repeat

Let dry for a few minutes then size----even my big 338 Slowpoke (338 Lapua variant) cases size with Very Little Effort and are always consistently sized.

Trick I learned from Speedy..
__________________
The Truth Is Not Always Good For Business!!
Reply With Quote
  • Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: .270Win Chamber too small
    Thread Thread Starter Forum Replies Last Post
    270Win silvertip-co Long Range Hunting & Shooting 37 05-19-2013 07:34 PM
    Small rifle primer vs small pistol primer??? HUAINAMACHERO Reloading 6 05-22-2012 10:27 PM
    .338 Norma Brass Small or Chamber Problem? Conrad Gunsmithing 8 01-16-2011 12:59 AM
    270win to 25-06 padd54 Reloading 0 11-03-2009 11:34 AM
    aim small, miss small šlg Long Range Scopes and Other Optics 6 03-31-2009 07:04 PM


    All times are GMT -5. The time now is 12:53 AM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC