close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets

Reply

270 WSM brass and load data

LinkBack Thread Tools Display Modes
  #22  
Unread 11-07-2011, 05:10 PM
Junior Member
 
Join Date: Jun 2011
Posts: 14
Re: 270 WSM brass and load data

thanks every one i have enough data now.thanks all
Reply With Quote
  •   #23  
    Unread 11-20-2011, 04:39 AM
    Junior Member
     
    Join Date: Jul 2011
    Location: Bismarck, ND
    Posts: 4
    Re: 270 WSM brass and load data

    I have been loading 130 accubonds in winchester brass with 65.5 grains of reloader 19. This load shoots at 3158 with an extreme spread of 7 fps. I have not done a lot of LR hunting, but i plugged a coyote with this load a week ago at 721yds. This isnt the fastest load in the books but has been very accurate in all three of the 270 wsm's I owne.
    Reply With Quote

      #24  
    Unread 11-20-2011, 07:59 AM
    Platinum Member
     
    Join Date: Apr 2004
    Location: Reno Nevada
    Posts: 1,731
    Re: 270 WSM brass and load data

    Hey that's an awesome shot ! What damage did it do to the coyote ?
    __________________
    How does it profit a man if he gains the whole world but loses his soul?
    Reply With Quote
      #25  
    Unread 11-20-2011, 11:25 PM
    Junior Member
     
    Join Date: Jul 2011
    Location: Bismarck, ND
    Posts: 4
    Re: 270 WSM brass and load data

    It actually did better thana I thought! I was shoot ing from the top of a hill and the coyote was down in a draw across a pasture. It hit the coyote low in the chest and exited about the size of a qaurter about two inches above the tail he was sitting facing towards me. I have to say I was addicted to LR hunting after that! Watching the bullet hit after the crosshairs have sttled from the recoil was awsome!
    Reply With Quote
      #26  
    Unread 06-01-2012, 06:53 PM
    Junior Member
     
    Join Date: Apr 2012
    Posts: 7
    Re: 270 WSM brass and load data

    Very good info on the 270 wsm, thanks! This forum has a pile of good info for people like me just starting out on long range shooting.
    Reply With Quote
      #27  
    Unread 06-02-2012, 07:18 AM
    Platinum Member
     
    Join Date: Jan 2008
    Location: Northeast
    Posts: 3,406
    Re: 270 WSM brass and load data

    I settled on Win brass, Fed215 primers, and IMR4350 with 62.5 grains using 140 Accubonds and Ballisic Tips. Groups with both in the .25-.5 MOA range with my Wnchester Supergrade Velocities run around 3200FPS with tight spreads. I have had issues with temp sensitivity with the Reloader powders.
    __________________

    "Let us speak courteously, deal fairly, and keep ourselves armed and ready"-T. Roosevelt
    Reply With Quote
      #28  
    Unread 05-31-2014, 09:38 AM
    Junior Member
     
    Join Date: Mar 2010
    Posts: 27
    Re: 270 WSM brass and load data

    someone has data for VV-N560 with 130 gr?
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: 270 WSM brass and load data
    Thread Thread Starter Forum Replies Last Post
    Load data .243 Ackley varmit load please ballie Reloading 5 02-22-2011 01:49 PM
    7mm RUM Load data jrc36 Reloading 9 12-18-2009 11:29 AM
    338 RUM Load Data Cordell Reloading 3 04-01-2009 09:03 PM
    Load data PLEASE frankg Rifles, Bullets, Barrels & Ballistics 2 10-07-2003 11:54 PM
    300 win mag (220 SMK) load data. samson Rifles, Bullets, Barrels & Ballistics 2 10-03-2003 09:21 AM


    All times are GMT -5. The time now is 01:04 AM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC