270 WSM with 110gr Accubond

squirrelduster · #1 07-31-2009, 09:41 AM

I am planning on loading the 110gr Accubond but there is no load data on where to start.
It is for my Dad's rifle and he plans on maybe a coyote or two and our small blacktail deer.
Anyone with a load program that could run the numbers for me?
Thanks

Popapi · #2 10-21-2009, 03:39 PM

Quote:

Originally Posted by squirrelduster

I am planning on loading the 110gr Accubond but there is no load data on where to start.
It is for my Dad's rifle and he plans on maybe a coyote or two and our small blacktail deer.
Anyone with a load program that could run the numbers for me?
Thanks

Anyone do this load!??????

cstilt · #3 10-21-2009, 04:15 PM

I've no experience with that load so I can't tell you exactly. I do have a Hornady manual (7th ed) that lists loads for the 110gr Vmax and HP bullets. It could help you narrow down the powder selection and hopefully get you a place to start.

Powder Start Max Velocity

RL-15 47.5gr - 56.9gr 3400fps
H4350 53.8gr - 60.1gr 3300fps
IMR 4350 56gr - 64.5gr 3400fps
Viht N-160 56.5gr - 66.7gr 3400fps

That's all the loads they list in the manual.

Have fun and be safe. I hope hop this helps,

Chris

squirrelduster · #4 10-21-2009, 08:03 PM

I worked up a load that seems to shoot really well, 54.2 grains of Varget over the 110 gr Accubond.
Shoots pretty well, normally 3/4" at 100 yards. Smokin right along about 3550 fps.

We need to see what happens when it hits something. I will keep you posted.

bigngreen · #5 10-21-2009, 08:17 PM

I'm going to drop-in on some 110 grainers after hunting season and work up some coyote medicine, I can't get 140 Bergers to open up on them. I saw some 110 v-max's yesterday but I was kinda wondering if they would hold up to WSM speeds or how much coyote will be left if they do hit. Might be messy

Popapi · #6 10-21-2009, 08:20 PM

Thanks Guys!!!!!!!!!!!!!!

Popapi · #7 10-29-2009, 07:52 PM

Have anyone tried RL19 with this bullet!?