Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets


260 rem Brass

LinkBack Thread Tools Display Modes
Unread 08-23-2006, 06:33 PM
Bronze Member
Join Date: Nov 2005
Posts: 38
260 rem Brass

I'd like to try some Laupa brass for my new 260 Rem.

I understand Laupa dont do 260 rem so am I best to neck down 308 or neck up 243?
Reply With Quote

Unread 08-23-2006, 08:38 PM
Platinum Member
Join Date: Jul 2002
Posts: 2,855
Re: 260 rem Brass

I personaly plan to neck 308 Lapua brass down to 260 so it'll thicken the necks a little this will allow for a better fit but may require neck turning if the chamber is tight.
Si Vis Pacem Parabellum
Molon Labe
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: 260 rem Brass
Thread Thread Starter Forum Replies Last Post
338 Lapua Brass compared to 300 Remington Ultra Brass DANTEC Rifles, Bullets, Barrels & Ballistics 6 02-29-2012 11:43 PM
Group differences in Weatherby Brass versus new Norma Brass TX mountain hunter Long Range Hunting & Shooting 5 12-29-2010 10:17 PM
25-06 reloading dies, brass, and bullets / 45ACP brass jeffro Reloading Equipment and Components 1 05-01-2010 10:51 AM
338 Edge, Brass life test. Rem 300RUM brass AJ Peacock Reloading 15 12-30-2009 12:26 PM
Nosler Brass cosmetic seconds good brass? sambo3006 Reloading 6 01-04-2007 08:57 PM

All times are GMT -5. The time now is 06:07 PM.

All content ©2010-2015 Long Range Hunting, LLC