.260 load data with berger bullets?

[rambuster]

Does anybody have load data for a .260 rem using berger bullets?

[mikeooa]

My research says the Berger 140 VLD with 36 gr. of RL-15 set just .020 off the lands is good for 1.2 inches at 200 yd.s. Savage Model 110. Got to know where your land's are...

[Greyfox]

Savage LRP 260. 26" barrel. Lapua brass, .292" neck dia. 140 BergerVLD, 46 gr.H4832SC, fed210M, .005"off the lands. .25MOA 5 shots at 200 yards. Work up from 44.5, max pressure. 2820FPS

[blackdog]

Rem700 blueprinted, Brux 26" #17HV barrel, 1:8.5 twist, WW 7mm-08 brass, Win LR primers, 130g Bergers with H4350. Can't recall exactly the charge (worked up from 41g) or the speed, but this is a very accurate combination for me and proved deadly on this year's antelope trip with 4 kills total out to 600 yards.

[Greyfox]

Originally Posted by Greyfox

Savage LRP 260. 26" barrel. Lapua brass, .292" neck dia. 140 BergerVLD, 46 gr.H4832SC, fed210M, .005"off the lands. .25MOA 5 shots at 200 yards. Work up from 44.5, max pressure. 2820FPS

Correction: H4831SC is the powder

[mnhntr]

41.5gr H4350 in a 7mm-08 win case necked down and a 140gr VLD. The problem was the SMKs grouped better and were faster so I quit using the VLDs

[Hondo64d]

Here's a couple of loads that have worked well for me. The OALs include a Sinclair "hex nut" bullet comparator. For base to ogive measurement, subtract 1" from OAL.

John