  | 260 load 140 berger |
08-22-2011, 10:13 PM
|
|
Junior Member
|
|
Join Date: Jul 2007
Posts: 9
|
|
|
260 load 140 berger
Need a good 260 load for the 140 berger , What powder would give the most speed and accuracy.
|
08-23-2011, 04:10 AM
|
|
Platinum Member
|
|
Join Date: Jan 2008
Location: SOCIALIST CONTROLLED TERRITORY OF NEW YORK
Posts: 4,061
|
|
|
Re: 260 load 140 berger
H4350 is the one I have had the most luck with if you cant get that then H414 is the next best bet.
|
08-23-2011, 08:24 AM
|
|
Silver Member
|
|
Join Date: Oct 2008
Location: New York, NY
Posts: 173
|
|
|
Re: 260 load 140 berger
h4350 seems to be the go to powder. when i built up mine i didnt have any and was anxious to get out so i used rl22 and was so pleased i never tried anything else. speeds may have been a few fps slower but 10 shot groups were easily covered by a dime.
d
|
08-27-2011, 07:31 AM
|
|
Bronze Member
|
|
Join Date: Mar 2008
Posts: 81
|
|
|
Re: 260 load 140 berger
41.5 grains of RE17 Federal Match primers, Lapua 308 cases, 2850 FPS in a 27" tube. This isn't a high pressure load for my gun.
|
08-27-2011, 05:48 PM
|
|
Platinum Member
|
|
Join Date: Jan 2008
Location: Falls Church, VA
Posts: 2,752
|
|
|
Re: 260 load 140 berger
H4350 will be your most reliable powder.
__________________
I'm not gonna shoot here. I'm gonna shoot waaaaaaaay over there!
|
08-28-2011, 04:30 AM
|
|
Silver Member
|
|
Join Date: Jul 2007
Posts: 106
|
|
|
Re: 260 load 140 berger
47 grs. IMR 7828ssc,lapua 308cases,cci 200 primers. I could not get h4350 to work well for me.
|
09-08-2011, 12:52 AM
|
|
Silver Member
|
|
Join Date: Aug 2009
Posts: 117
|
|
|
Re: 260 load 140 berger
I run about 43 grains of h4831sc and get 2680 fps with a 26 inch tube and 140 bergers
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
|
|
All times are GMT -5. The time now is 09:21 PM.
