Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Techniques For Reloading


Reply

260 AI tight neck

 
LinkBack Thread Tools Display Modes
  #1  
Old 06-10-2008, 08:11 PM
Junior Member
 
Join Date: Jan 2008
Location: texas
Posts: 28
260 AI tight neck

Been kicking around some ideas. Have a short action Rem squared and trued currently with a 30x44 tight neck. Thinking about a 6.5 in something. Kicked around the idea of a 6.5 284 but would have to single shot it.
Has anyone had any experince with a 260 AI. With it you could load from the magizine.
Thanks ddgo
Reply With Quote
  #2  
Old 06-10-2008, 08:24 PM
Platinum Member
 
Join Date: Jul 2002
Posts: 2,856
I had a standard 260 with a "match" cut chamber , I used 308 Lapua brass necked down and I had to turn the necks just enought to clean them up to 100% then they fit perfect , so I was getting the bennifits of a tight neck but still able to shoot factroy ammo if needed. I'm not to sure what all you would gain from going witht he Ai chamber maybe a bit more velocity and limited case streach neither of which I had any trouble with , even with the shorter 308 size case if the gun is chambered with a long throat for the 140 class VLD's so that they aren't stuck down in the case then its a good idea to have a Wyatt's box installed.

OR

the 6.5x47Lapua is a great little round and velocity wise gives up very little if any to the 260 and Ai version all with smaller case , better feeding and less powder. I know that this case necked down to 6mm will run with the 243 and 243 Ackley even shooting 115gr bullets. Its track record for accuracy is steady improveing as more folks shoot this round.
__________________
Si Vis Pacem Parabellum
Molon Labe
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: 260 AI tight neck
Thread Thread Starter Forum Replies Last Post
300 RUM reamer .333 (tight neck) neck diameter F/S Michael Eichele Other Stuff For Sale 1 05-28-2009 10:44 PM
Does any one have a tight neck .30-.378 Wby reamer Marine sniper Gunsmithing 5 07-26-2008 03:36 PM
tight neck ? šlg Rifles, Bullets, Barrels & Ballistics 5 03-11-2005 12:05 PM
tight neck chambering marlow 243 The Basics, Starting Out 6 02-03-2004 01:54 PM
Standard or tight neck ? Rifles, Bullets, Barrels & Ballistics 7 11-13-2003 05:37 PM


All times are GMT -5. The time now is 06:24 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC