close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets

Reply

250 accubond load fo 338 Edge

LinkBack Thread Tools Display Modes
  #22  
Unread 07-16-2009, 02:34 PM
Platinum Member
 
Join Date: Jan 2003
Location: The rifle range, or archery range or behind the computer in Alaska
Posts: 3,819
Re: 250 accubond load fo 338 Edge

Sorry to bug you again, do you know if the ogive (nose to bearing surface) is the same between the 250 SMK and the 300 SMK?

Thanks for your help so far!
__________________
__________________
Long range shooting is a process that ends with a result. Once you start to focus on the result (how bad your last shot was, how big the group is going to be, what your buck will score, what your match score is, what place you are in...) then you loose the capacity to focus on the process.
Reply With Quote
  •   #23  
    Unread 07-16-2009, 02:51 PM
    Platinum Member
     
    Join Date: Oct 2005
    Location: Michigan
    Posts: 2,232
    Re: 250 accubond load fo 338 Edge

    I don't have any 250SMKs. I have some 250 gamekings if that helps, but I haven't done any testing with them. Is there a particular measurement you would like me to get from my chamber for you? The barrel was chambered by pac-nor.

    AJ
    __________________
    If some is good and more is better, then too much is just right.


    My mind is a raging torrent, flooded with rivulets of thought, cascading into a waterfall of creative alternatives
    Reply With Quote

      #24  
    Unread 07-16-2009, 03:05 PM
    Platinum Member
     
    Join Date: Jan 2003
    Location: The rifle range, or archery range or behind the computer in Alaska
    Posts: 3,819
    Re: 250 accubond load fo 338 Edge

    I sent you a PM.
    __________________
    __________________
    Long range shooting is a process that ends with a result. Once you start to focus on the result (how bad your last shot was, how big the group is going to be, what your buck will score, what your match score is, what place you are in...) then you loose the capacity to focus on the process.
    Reply With Quote
      #25  
    Unread 07-16-2009, 04:11 PM
    Platinum Member
     
    Join Date: Feb 2004
    Location: Pennsyltucky
    Posts: 2,630
    Re: 250 accubond load fo 338 Edge

    Michael Eichele; do you know if the ogive (nose to bearing surface) is the same between the 250 SMK and the 300 SMK?

    i remember talking with an engineer at Sierra a couple years ago and he told me the front of the bullets, encluding the cavity, was the same. the wall thickness on the 250's is actually about .001 thicker because they use the same jackets. the jackets are tappered and since the 250's are shorter the material used is actually a bit thicker towards the tip of the bullet.
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: 250 accubond load fo 338 Edge
    Thread Thread Starter Forum Replies Last Post
    30-378 200 grn Accubond Load SquirrelNuts Reloading 4 11-06-2008 09:25 PM
    7mm rem mag, 140 accubond load??? j70070 Rifles, Bullets, Barrels & Ballistics 0 01-30-2008 04:29 PM
    7mm Accubond Load PaHitman Reloading 4 03-06-2006 08:30 AM
    7 stw accubond load help dale thames Rifles, Bullets, Barrels & Ballistics 7 11-03-2004 04:53 PM


    All times are GMT -5. The time now is 05:50 AM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC