Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Techniques For Reloading


Reply

25-06- Loose Primer Pockets

 
LinkBack Thread Tools Display Modes
  #15  
Old 06-01-2010, 04:57 PM
Silver Member
 
Join Date: Nov 2008
Location: Lincoln, NE
Posts: 185
Re: 25-06- Loose Primer Pockets

+1 on the difference in primer brands. I've had no issues with CCI BR2s, but the Win primers seat "looser" than the BR2s. Who can get Federal primers right now to check them?

56 gr of RL22 is MAX load in my 25-06 with 100 gr BT as well...Especially in summer!!!

Good luck getting this resolved, and let us know what you find out,

Brian
Reply With Quote
  #16  
Old 06-01-2010, 07:10 PM
Silver Member
 
Join Date: Apr 2010
Location: Roseburg, Oregon
Posts: 314
Re: 25-06- Loose Primer Pockets

I will try some federal 210's. But I think it is the brass. I been using the same lot of primers in 7 different guns and I have no problem with those cases. Thankyou for all your guys input.
Reply With Quote
  #17  
Old 06-01-2010, 09:55 PM
Silver Member
 
Join Date: Oct 2008
Location: Kodiak, Ak
Posts: 357
Re: 25-06- Loose Primer Pockets

.5/06, all bullet weights Bullet Powder Weight Powder Velocity OAL Primer Source 100gr SP 53.0 gr h4350 3,315 fps 3.200" Fed LRM guest from hodgdon lab 63300 psi ,nos bt
120gr SP 52.5 gr h4831 2,970 fps 3.150" Fed LRM guest from hodgdon lab, 62300 psi 120gr swift sp
129gr SP 51.0 gr h4831 2,889 fps 3.245" Fed LRM guest from hodgdon lab 62900psi 129 gr hdy sp
129gr SP 55.0 gr Reloader 22 3,250 fps LR guest Sako action, douglas 27 inch barrel, remington primers, win brass, tight neck chamber. Max load, approach with caution.
140gr SP 49.5 gr h4831 2,731 fps 3.200" Fed LRM guest from hodgdon lab 62300 psi 140 gr speer grand slam
140gr BTHP 55.0 gr Reloader 22 Unknown LR guest Sako action, tight neck, 27 inch barrel, winchester brass. Loaded .005 into lands on douglas barrel, shoots in the 1’s. Max load approach with caution.
140gr BTHP 52.5 gr H-4831SC 2,909 fps 3.340" Fed LRM guest 140gr A-Max moly, 5 shot groups @ 200yds .525". 5 shot group @ 500 meters, 2.355"
140gr JSP 51.0 gr IMR 4350 3,005 fps 3.24" Fed LR guest Custom Pac Nor barrel- load 0.03 off the lands. Hot but no signs of pressure on my brass higher than factory 30-06 loads(necked up 25-06 Remington). In my gun 1" 3 shot groups common, best about .3
142gr BTHP 55.0 gr h1000 2,816 fps 3.300" Fed LRM guest from hodgdon lab 63300psi 142 gr sierra hpbt
160gr SP 55.0 gr h1000 2,650 fps 3.300" Fed LRM guest from hodgdon lab 62400 psi 160 gr hornady rn any other bullet of this weight may seriously raise pressure
85gr BTHP 52.0 gr varget 3,588 fps 3.140" Fed LRM guest from hodgdon lab 62500 psi

95gr SP 54.5 gr h4350 3,436 fps 3.200" Fed LRM guest from hodgdon lab 63300psi hdy vmax 12 Handloads


Users assume all risk, responsibility and liability whatsoever for any and all injuries (including death), losses or damages to persons or property (including consequential damages), arising from the use of any data, whether or not occasioned by publisher's negligence or based on strict liability or principles of indemnity or contribution. Handloads.Com neither assumes nor authorizes any person to assume for it any liability in connection with the use of any data.
It took 0.06 seconds to build this page
Questions or comments? | Donate to Handloads.Com | Site Map
Copyright 2000-2008
Reply With Quote
  #18  
Old 06-02-2010, 03:34 AM
Platinum Member
 
Join Date: Feb 2008
Location: IOWA
Posts: 1,873
Re: 25-06- Loose Primer Pockets

You are having pressure signs by getting loose primer pockets.
You don't need a stiff bolt lift or pierced primers to have pressure issues.
I would either back off your load alittle, or switch to Win or Lapua brass.
Personally, would not go to the trouble of sending brass to Remington as you are at your pressure limit with that load according to quikload.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: 25-06- Loose Primer Pockets
Thread Thread Starter Forum Replies Last Post
338 edge once fired primer pockets loose D.ID Reloading 14 04-29-2011 04:23 PM
Loose primer pockets after 1st firing? texan79 Reloading 6 10-18-2010 10:37 AM
Loose Primer pockets 338 RUM D.Camilleri Reloading 7 09-19-2010 12:43 PM
Why NOT to use super glue on loose primer pockets royinidaho Reloading 34 03-23-2010 06:35 PM
loose primer pockets clif Rifles, Bullets, Barrels and Ballistics 3 08-13-2001 09:09 AM


All times are GMT -5. The time now is 01:49 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC