Re: 25-06 loads ?
I tried the 110gn AB back in 2005 with a couple different powder/primer combos and RL22 was one of them. I tried 53.0 - 54.5gn and best groups was with 54.5gn. Velocity averaged 3271fps and accuracy was .669". I tried the same load again, three days later and got 3271fps and .6965". These loads were developed using the Rem 9.5M printer. Not the accuracy I was hoping for and certainly not what this Sendero SF was capable of, but very consistent.
Looking back, I think I could have pushed it a little harder, but didn't have access to a lot of load data for the 110gn AB with RL22 to go off of at that time.
I tried IMR4831/BR2 from 51.0-52.5gn with nothing better than .7205".
I tried IMR4350/BR2 from 48.0-49.5gn and accuracy ran from .4345" to .749", respectively. Velocity was 3009fps to 3115fps.
Don't have a lot of info on them as I remember I only tried one box and went to the 115gn Berger and they rocked in this rifle, so I never picked them back up.
Right now I'm shooting 52.0gn RL22/9.5M with 115gn Ballistic Tips and 117gn Sierra BT. Velocity and accuracy for both bullets is consistently 3050-3060fps and .4". Hope this helps. JohnnyK.