close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets

Reply

25-06 load questions

LinkBack Thread Tools Display Modes
  #1  
Unread 08-01-2010, 11:08 PM
Junior Member
 
Join Date: Oct 2008
Location: south East mo.
Posts: 5
25-06 load questions

https://www.midsouthshooterssupply.c...=yes&submit=GO These are the bullets I have on order and I picked up some H-4350 powder and CCI primers locally. Anyone have any suggestions on the starting, powder charges I should use on this combination? I'm mainly going to use these to punch paper. Thanks!
Reply With Quote
  •   #2  
    Unread 08-02-2010, 07:48 AM
    Platinum Member
     
    Join Date: Jan 2008
    Posts: 1,448
    Re: 25-06 load questions

    Hodgdon 06 manual says start load for 100 gr bullets in the 25-06 with H-4350 is 47.0 grs and max is 50.0 grs. Work up to it but most of the time somewhere around 49 to 50 grs is where H-4350 shoots well. I have always found 52 grs. IMR 4350 with 100 gr bullets to be really accurate.
    Reply With Quote

      #3  
    Unread 08-04-2010, 09:19 PM
    Bronze Member
     
    Join Date: Jan 2009
    Posts: 60
    Re: 25-06 load questions

    I would start with 48.5 grains and work up in 0.3 grain increments to see where you find a sweet spot. I an using 52 grains of H4350 with the 100 grain Barnes TSX bullet. In most of my rifles in the 25-06 class of capacity up to my 270 Weatherby I have found that H4350 is the most accurate powder. For paper punching, play with the powder charge until you find a nice, circular group and then play with the seating depth to see if you can fine tune the load. My 25-06 Browning single shot B-78 is my hunting rifle of choice for hogs, antelope and deer and will shoot lights out when I fine tune a load. I have had excellent luck with Reloader 25 using 100 and 110 grain bullets with higher velocity than I can achieve with H4350 with similar accuracy. Good shooting. Tom
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: 25-06 load questions
    Thread Thread Starter Forum Replies Last Post
    7mm rum load questions Tightline2001 Rifles, Bullets, Barrels & Ballistics 2 08-09-2011 11:53 PM
    questions on 7mm RUM load development boyce Reloading 0 07-24-2010 03:46 PM
    I have questions about working up a new load duck911 Reloading 3 08-31-2009 09:58 PM
    Load Development Questions. samson The Basics, Starting Out 8 04-27-2003 07:26 PM
    WOW .. no more asking Load Questions Check this out!!! *WyoWhisper* Rifles, Bullets, Barrels & Ballistics 6 04-25-2003 08:36 PM


    All times are GMT -5. The time now is 01:23 AM.


    Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC