Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Techniques For Reloading


Reply

25-06 brass forming help

 
LinkBack Thread Tools Display Modes
  #1  
Old 10-17-2008, 01:44 PM
Silver Member
 
Join Date: Jan 2008
Posts: 177
25-06 brass forming help

can i buy norma or nosler 30-06 brass and run it through the 25-06 fl die to form them or are there steps in between that i must do? use .270 or .280 instead?
Reply With Quote
  #2  
Old 10-17-2008, 02:45 PM
Platinum Member
 
Join Date: Nov 2006
Location: Dayton, Nevada
Posts: 1,817
Re: 25-06 brass forming help

That's all there is to it.

270 and 280 might be a good intermediate step, but if you are careful and lube well, you should be ok.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: 25-06 brass forming help
Thread Thread Starter Forum Replies Last Post
forming 350 Rem mag brass Skimbleshanks Reloading 6 02-26-2011 11:00 PM
Forming .260 brass rugerdog5 Reloading 4 05-25-2010 02:22 PM
forming 6.5-06 brass trueblue Reloading 9 02-11-2010 07:30 AM
forming brass shooterpunk2 Reloading 4 06-13-2008 03:03 PM
Forming 7mm-08 Brass sewwhat89 The Basics, Starting Out 3 12-03-2005 09:56 PM


All times are GMT -5. The time now is 05:24 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC