close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets

Reply

25-06 and 110 gr accubonds

LinkBack Thread Tools Display Modes
  #1  
Unread 06-09-2005, 06:39 PM
Silver Member
 
Join Date: Jun 2005
Posts: 165
25-06 and 110 gr accubonds

anyone try these yet? Loads, velocity, and comments appreciated!
Reply With Quote
  •   #2  
    Unread 06-09-2005, 08:47 PM
    Silver Member
     
    Join Date: Mar 2004
    Location: New Mexico
    Posts: 244
    Re: 25-06 and 110 gr accubonds

    Dufur, Don"t own a 25-06, but I have been shooting these out of my 257 STW and they are great. Excellent accuracy at over 3450 fps. They should be great. I spoke to the guys at Nosler and they designed this bullet to be the mirror image of the 115 ballistic tip. Thats why the 110 gn, the bullet is the same size as Ball tip that way. Any data for the 115 ball tip should work for the 110 accubond.
    __________________
    Become sheep and the wolves will eat you!
    Reply With Quote

      #3  
    Unread 06-10-2005, 12:15 PM
    Silver Member
     
    Join Date: Jun 2005
    Posts: 165
    Re: 25-06 and 110 gr accubonds

    Thanks, that will get me started. Right now my favorite load for my MKV lightweight 25-06 is hornady case, fed 210 primer, 56 gr RL22 and Hornady 117 btsp. She's not a tack driver but I have her under 1.5 ave 3 shot group @ 100 yd. A lot better than it was doing before I replaced the stock and adjusted the forearm upward pressure on the barrel.
    Reply With Quote
      #4  
    Unread 06-12-2005, 08:47 AM
    Silver Member
     
    Join Date: Mar 2004
    Location: New Mexico
    Posts: 244
    Re: 25-06 and 110 gr accubonds

    I have had great luck with the Ramshot powders, they meter nicely from the powder measure, since they are ball powders. I wouldnt be suprised if your gun groups better with the Nosler bullets.
    __________________
    Become sheep and the wolves will eat you!
    Reply With Quote
      #5  
    Unread 06-14-2005, 08:06 AM
    Silver Member
     
    Join Date: May 2004
    Location: North Louisiana
    Posts: 257
    Re: 25-06 and 110 gr accubonds

    If they are just the size of the 115 NBTs like mentioned above, I would give IMR 7828 a try.

    W/ 115 NBTs I'm getting sub MOA groups w/ 53 grns 7828, Rem Brass, WLR Primers. Measures 3050 @ 15' from muzzle. Not a real screamer but starting to show pressure w/ that charge.

    R22 gives me better velocity but, I couldn't get the groups as w/ the 7828.

    Good Luck!

    Reloader
    Reply With Quote
      #6  
    Unread 06-14-2005, 06:48 PM
    Platinum Member
     
    Join Date: Jul 2002
    Posts: 2,855
    Re: 25-06 and 110 gr accubonds

    I load for a couple 25-06's and I have to second the
    IMR-7828 it makes for a realy consistant load and now that IMR had the new 7828 super short cut that should make things even better
    I have also gotten realy good results with trusty old 4831 ,that gave me the best velocities and decient accuracy but the guys that own these guns wanted more accuracy than speed.
    __________________
    Si Vis Pacem Parabellum
    Molon Labe
    Reply With Quote
      #7  
    Unread 06-14-2005, 07:54 PM
    Platinum Member
     
    Join Date: Jan 2005
    Location: Pocahontas, AR
    Posts: 1,047
    Re: 25-06 and 110 gr accubonds

    I also have wondered about 7828 short cut & I want to try the 110 Accubond. Right now I get 3,304 ave. vel. with RL25
    & 120 Part. in a Sendero. But it looks like in 2-3 weeks I
    can send it and my brothers Sendero as well to Kirby to get
    the A.I. treatment if he can still work us in.
    __________________
    You will not make peace with the Blue Coats, you are free to go.
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: 25-06 and 110 gr accubonds
    Thread Thread Starter Forum Replies Last Post
    225 gr accubonds on elk Ultramag45 Rifles, Bullets, Barrels & Ballistics 24 04-24-2015 02:01 PM
    .260 rem with 130 accubonds... santee116 Reloading 3 05-14-2010 12:52 AM
    FS 30 cal. 165 Accubonds Idaho Sawyer Reloading Equipment and Components 2 05-03-2010 10:45 PM
    140 Gr Accubonds for STW Blacktail Reloading 19 07-06-2006 02:00 PM
    7mm accubonds firstcoueswas80 Guns For Sale 6 03-06-2006 11:22 AM


    All times are GMT -5. The time now is 07:41 AM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC