Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Techniques For Reloading


Reply

.243 winchester load/barrel breakin 2 part question

 
LinkBack Thread Tools Display Modes
  #1  
Old 06-03-2010, 02:52 PM
Silver Member
 
Join Date: Oct 2006
Posts: 148
.243 winchester load/barrel breakin 2 part question

I just bought my son a Savage .243 winchester youth rifle for graduating his hunter educatuion class. This will make him eligable to hunt this fall, and I am so looking forward to this. My son has been coming hunting with me since he was 4 years old so now that he will be able to carry a gun and shoot stuff is very exciting for both him and I.
Part #1
Anyways I want to shoot 85 gr Barnes TSX bullets out of this gun. Do any of you guys have a load for this bullet/powder combination that has worked well for you? Also I see alot of loads on the internet with a Federal 210 primer. I have a decent supply of Federal 215M primers would these primers work for a load in a .243? Any help would be great.
Part #2
Also I have seen alot of different points of view on the proper barrel breakin procedure. What do you recommend for breaking in a new rifle barrel?

Thx

Last edited by lefty15; 06-03-2010 at 04:56 PM.
Reply With Quote
  #2  
Old 06-03-2010, 07:47 PM
Silver Member
 
Join Date: Sep 2009
Location: La Plata NM
Posts: 357
Re: .243 winchester load/barrel breakin 2 part question

Good choice on bullet, they hit like a hammer. Also don't hesitate trying a Berger 95 gr. hunting VLD. Each has seating depth guidelines so pay attention to that. As far as loads you can get loading info on Barnes website and Walt Berger will send you loads for his bullets as well. As far as the primer you can use the 215 but you will have to use less powder because it is a hotter primer. I would stick with a 210 or any large rifle non magnum primer. Midway has a few different ones in stock. If you reload then break in your barrel with David Tubb's Final Finish. I use it with both factory and custom barrels and it works great. Midway carries the Final Finish but I order it directly from Superior Shooting Systems. Their technical support is very good. Good shooting with your son!!
Reply With Quote
  #3  
Old 06-04-2010, 04:55 AM
Silver Member
 
Join Date: Aug 2009
Location: Carlisle, PA
Posts: 478
Re: .243 winchester load/barrel breakin 2 part question

My experience with the NECO fire lapping bullets is that they make the rifle easier to clean but don't do much if anything for accuracy. I've seen as much as .040" of throat wear from using them. In my opinion firelapping is the last resort for trying to save a barrel that should be replaced.

The TTSX is an excellent bullet choice. The RL19 and H4350 load data on the Barnes web site will get you started and may be all you need.

I don't recommend a magnum primer in the .243 or any non-magnum cartridge unless the load manual calls for it. Non-magnum large rifle primers work great in a .243.

Fitch
Reply With Quote
  #4  
Old 06-05-2010, 03:55 PM
Platinum Member
 
Join Date: Feb 2006
Location: az
Posts: 2,240
Re: .243 winchester load/barrel breakin 2 part question

37.5 of I 4064 and 38.0 of varget and the 85 sierra bthp . both loads shoot 3/4 inch or less out of every .243 i have tried. killed a bunch of mule deer with it. i would not use mag primers in the .243 raises velocity , pressure , ES , and bigger groups genrally
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: .243 winchester load/barrel breakin 2 part question
Thread Thread Starter Forum Replies Last Post
Yet another barrel breakin/cleaning question... cdherman Rifles, Bullets, Barrels and Ballistics 4 11-12-2010 09:24 AM
.243 winchester load/barrel berakin 2 part question lefty15 Reloading 0 06-03-2010 02:51 PM
barrel breakin?? KingJames338Lap General Discussion 3 07-19-2009 09:33 AM
Barrel Breakin Tbolt Rifles, Bullets, Barrels and Ballistics 8 04-10-2009 10:14 AM
7AM Barrel Breakin- part 4 Buffalobob General Discussion 1 09-18-2006 07:44 PM

Current Poll
Do you archery hunt for elk?
YES - 30.98%
57 Votes
NO - 53.26%
98 Votes
Not yet, but I plan to. - 15.76%
29 Votes
Total Votes: 184
You may not vote on this poll.

All times are GMT -5. The time now is 11:16 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC