Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets


.243 Win sizing question

LinkBack Thread Tools Display Modes
Unread 01-05-2011, 10:36 PM
Silver Member
Join Date: Oct 2010
Location: Texas
Posts: 468
.243 Win sizing question

I am about to load for my first non-factory cartridge, the .243 Ackley Improved.
I purchased some new WW .243 Win brass and would like to load and fireform it in the AI chamber.

My question is:
Can I size the std. .243 brass with my .243 AI die set or should I purchase a set of std. .243 Win. dies to do this?

"Be not ye afraid of them: remember the LORD, which is great and terrible, and fight for your brethren, your sons, and your daughters, your wives, and your houses." Nehemiah 4:14
Reply With Quote

Unread 01-05-2011, 11:12 PM
Junior Member
Join Date: Oct 2009
Posts: 12
Re: .243 Win sizing question

Your AI dies will be fine, about all you will be doing to the new brass is truing up the necks. ed
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: .243 Win sizing question
Thread Thread Starter Forum Replies Last Post
sizing question CRNA Reloading 7 02-19-2011 12:13 AM
sizing question longbomb Reloading 1 06-08-2010 10:06 PM
Neck sizing die question? hawken11 Reloading 11 10-16-2006 10:11 PM
Yet another question( Neck Sizing) Rifles, Bullets, Barrels & Ballistics 11 08-08-2004 03:01 PM
Sizing die question winmagman Rifles, Bullets, Barrels & Ballistics 5 07-28-2004 10:43 AM

All times are GMT -5. The time now is 09:46 PM.

All content ©2010-2015 Long Range Hunting, LLC