Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets


.243 Seating depth

LinkBack Thread Tools Display Modes
Unread 06-15-2010, 06:36 PM
TAC TAC is offline
Silver Member
Join Date: Oct 2007
Location: Silverton, Oregon
Posts: 111
Re: .243 Seating depth

I'm shooting the 95's with H-4831sc and couldn't be happier.

48.0 grains seated at 2.84" (touching).
Average velocity is 3151 fps.

You've heard the rule of thumb but sometimes you must seat out further because of a long throat. I feel as long as the bullet doesn't move when chambering then round then you'll be okay. I single feed mine, but you'll also have to consider length if they're going into a mag.

Good luck.


Last edited by TAC; 06-15-2010 at 06:43 PM.
Reply With Quote



Thread Tools
Display Modes

Similar Threads for: .243 Seating depth
Thread Thread Starter Forum Replies Last Post
Seating depth?? bates132 Reloading 7 11-05-2010 09:27 AM
Seating depth Rickyrebar Reloading 7 05-09-2010 08:23 AM
6.5-284 Seating Depth okshooter Rifles, Bullets, Barrels & Ballistics 3 02-28-2004 11:06 PM
seating depth for 6mm 107 gr MK wannabee Rifles, Bullets, Barrels & Ballistics 1 05-23-2003 06:15 AM
Seating depth? samson The Basics, Starting Out 9 04-15-2003 09:31 AM

All times are GMT -5. The time now is 11:35 PM.

Powered by vBulletin ©2000 - 2015, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC