Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets


223 Bushing Size

LinkBack Thread Tools Display Modes
Unread 04-29-2005, 04:10 PM
Silver Member
Join Date: Nov 2004
Location: Shiro, TX
Posts: 102
223 Bushing Size

Anyone out there use bushing dies for a no neck turn .223 remington? I thought I sized mine properly but it is definitely too small. My loaded necks measure .247-9" and the bushing I'm using is .244 I'm guessing a .245 or .246 The brass is getting shaved down the neck then when the bullet is seated I can see the bullet expanding the neck back out down to the point where the base of the bullet sits. Can anyone say over worked brass?

Reply With Quote

Unread 04-29-2005, 05:05 PM
Gold Member
Join Date: May 2001
Location: Urich, MO
Posts: 838
Re: 223 Bushing Size

if your neck is 0.247 on a loaded round then you need to use a 0.245 or 0.246 bushing. Less neck tension for a bolt gun (0.246 bushing)- more for an AR (0.245 bushing).
Chris Matthews
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: 223 Bushing Size
Thread Thread Starter Forum Replies Last Post
What Size Bushing? IdahoJoe Reloading 6 08-24-2011 12:35 PM
Size for bushing to neck size rsbhunter Reloading 2 04-10-2011 05:55 PM
What size bushing for my 308? hunter966 Reloading 2 04-29-2010 08:49 AM
Bushing Size? bailey1474 Reloading 4 02-06-2006 09:16 AM
bushing size for 300 RUM robbor Rifles, Bullets, Barrels & Ballistics 3 06-23-2005 04:23 PM

All times are GMT -5. The time now is 12:09 PM.

Powered by vBulletin ©2000 - 2015, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC