Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets


208 A-Max load rec's for 300 RUM

LinkBack Thread Tools Display Modes
Unread 01-16-2010, 06:06 PM
KDB KDB is offline
Bronze Member
Join Date: Jun 2009
Location: Arkansas Delta
Posts: 94
208 A-Max load rec's for 300 RUM

I am sure that this type of post has popped up before, but I suck when it comes to searching the forums for old posts. So, thanks in advance.

I am looking for load recommendations for my 300 Rum using the 208 Amax. I use Retumbo with good success for my 190 VLD's, but am having trouble info on the 208's.

Also, do the Amax's typically like to be jammed or jumped. I usually jam the VLD's and am not worried about mag length as I shoot this one as a single shot.

I have a 28 inch HV Krieger on the rifle with a 1-11 twist.

Thanks again,

Also, bought some Remington brass today and it is the absolute worst brass I have seen. 18 of the 50's flash holes were not even close to being centered. Sucks that there are only two commercially available manufactures for this stuff (that I know about).
Reply With Quote



Thread Tools
Display Modes

Similar Threads for: 208 A-Max load rec's for 300 RUM
Thread Thread Starter Forum Replies Last Post
Kirby Allen’s “no load development” load development method. WildcatB Reloading 70 09-24-2012 06:01 PM
260 Load Help.. Quick Load??? novaman64 Reloading 6 09-02-2012 11:48 AM
Load data .243 Ackley varmit load please ballie Reloading 5 02-22-2011 01:49 PM
7mm STW fav. load The Warrior Reloading 3 05-25-2010 07:58 PM
308 load for elk jrdoty Reloading 4 08-03-2008 11:15 PM

All times are GMT -5. The time now is 12:32 PM.

All content ©2010-2015 Long Range Hunting, LLC