close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets

Reply

200 Grain Accubond Loads for .300 Win. Mag.

LinkBack Thread Tools Display Modes
  #1  
Unread 10-10-2009, 07:44 PM
Bronze Member
 
Join Date: Jun 2009
Posts: 87
200 Grain Accubond Loads for .300 Win. Mag.

Hey fella's, I am having a Long Range Hunting Rifle put together chambered in .300 Win. Mag. and am planning on using 200 grain accubonds. I was wondering if any of you had any good loads for this combination. Any suggestions would be greatly appreciated, thanks

Oh and if you were wondering the Rifle that I'm putting together is:

Remington 700 action
28" Hart Hunter Benchrest Contour 1-10" twist
McMillian A-3 Stock w/adjustable cheekpiece
Jewell Trigger
Talley Rings/bases
Leupold VX-III LR 6.5-20X
DE Brake
Put Together by Truman Wilson
Reply With Quote
  •   #2  
    Unread 10-10-2009, 07:53 PM
    Platinum Member
     
    Join Date: Mar 2003
    Location: Southern Wisconsin
    Posts: 1,381
    Re: 200 Grain Accubond Loads for .300 Win. Mag.

    70.0 to 72.0 grs. of Re 22 with a Fed 215 primer in Win brass works like a charm. Good for 2950fps out of a 26" factory barrel with .5" to .75" at 100 yds.

    Chris
    __________________
    Ignorance can be treated with education, sadly there is no cure for stupidity.
    Reply With Quote

      #3  
    Unread 10-10-2009, 07:55 PM
    Platinum Member
     
    Join Date: Dec 2008
    Location: Great Falls, MT
    Posts: 9,272
    Re: 200 Grain Accubond Loads for .300 Win. Mag.

    Welcome to LRH and enjoy. I'm fairly new in reloading and here is what I have brewing so far of my SAKOM995 .300 WM 23 1/2" 1:11 twist.



    100 yards
    200 NAB
    71.5gr H4831SC
    CCI250
    Once fired Federal brass
    COAL 3.62"

    Good luck!

    Ed
    __________________

    I voted for my "FREEDOM", "GUNS", and "MONEY" - keep the change - UNK.



    "I am always proud of my country!"

    "Leadership Rule #2: Don't be an ***hole." - Maj Gen Burton Field.
    Reply With Quote
      #4  
    Unread 10-10-2009, 08:25 PM
    Gold Member
     
    Join Date: Feb 2008
    Posts: 982
    Re: 200 Grain Accubond Loads for .300 Win. Mag.

    Hey, welcome to the forum!

    I'm running Nosler brass, Fed 215 primers and 78gr's of RE25 in my Rem 700 SenederoII based custom rifle with 28" barrel.

    My rifle is a tweaked Rem 700 SenderoII with PT&G S/S bottom metal, match barrel mated to a pinned Tubb recoil lug, Jewel trigger and original HS stock re-worked and bedded by myself. The action has been blueprinted and trued, and I have also fitted a PT&G spiral ground bolt and shroud.
    Reply With Quote
      #5  
    Unread 10-12-2009, 09:41 AM
    Silver Member
     
    Join Date: May 2005
    Location: Montana
    Posts: 439
    Re: 200 Grain Accubond Loads for .300 Win. Mag.

    My gun liked 74.5 gr H-1000 with Norma brass and fed 215's at 2860 ft/sec. Had it lots faster but the groups got worse. 26in barrel Savage BVSS.
    __________________
    Magic

    Last edited by magicofmt; 10-12-2009 at 12:09 PM.
    Reply With Quote
      #6  
    Unread 10-12-2009, 03:00 PM
    Bronze Member
     
    Join Date: Feb 2008
    Posts: 83
    Re: 200 Grain Accubond Loads for .300 Win. Mag.

    I shot BERGER 210's in a factory SAKO 75 and it was mosty accurate with H1000 powder
    Reply With Quote
      #7  
    Unread 10-15-2009, 09:37 AM
    Bronze Member
     
    Join Date: Jun 2004
    Location: Carlisle, PA
    Posts: 48
    Re: 200 Grain Accubond Loads for .300 Win. Mag.

    Rifle: Accuracy International .300 Win Mag

    Load: Lapua Brass
    Federal 215 M primer...sometime CCI Mag
    68 Grains IMR 4350
    Bullet: 200 grain Accubond

    Load: Lapua Brass
    Federal 215 M primer
    69 Grains IMR 4350
    Sierra 190 grain Match King

    Both loads will shoot 3/10's on most 'good' days!!
    I prefer Federal primers, however they seem to,
    not always be available when I want them.
    Sounds like a nice rifle, good luck.
    Oh...Lapua .300 Win Mag brass is no longer in production...Oh well.
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: 200 Grain Accubond Loads for .300 Win. Mag.
    Thread Thread Starter Forum Replies Last Post
    300 RUM Loads for 200 Grain Accubond rangerman Reloading 6 07-24-2011 10:44 PM
    .375 accubond 260 vs 300 grain 338 bruce Rifles, Bullets, Barrels & Ballistics 7 08-14-2010 11:49 AM
    Nosler Accubond .338 225 Grain jedlowe Reloading Equipment and Components 0 12-14-2009 02:37 PM
    200 grain accubond BC azleadburner Rifles, Bullets, Barrels & Ballistics 4 09-29-2006 10:47 PM
    180 grain Accubond loads for a .308 win 4ked Horn Reloading 14 02-17-2005 06:38 PM


    All times are GMT -5. The time now is 03:51 PM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC