Originally Posted by Bobo1699
Lees die Lee are my choise.I had A small ptoblem with my.233 dies I contacted
tech support.I sent my dies along with 2 fired new Brass cases. Lee ground out my dies to match my Chamber,I have not had any futher Problems withThe Dies.
Thank You Lee & company.
Forster will do the same. I don't know if Redding will.
Send your fired brass to Forster and they will cut a sizing die for you. One thing I didn't like about Redding was how the sizing die comes from the factory. It really squeezes the necks down tight causing the need for the expander to have a tight fit, squeek a lot, and all that work really hardens the brass.
I sent my dies back with a dummy loaded round and asked them to give me .0025 less diameter so when the neck is resized it does not require the expander, and there is .0005 room for spring back. I don't use an expander and haven't for years now and runout is almost a non-issue.