Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Techniques For Reloading


Reply

130gr ttsx, lapua, varget, 308 load

 
LinkBack Thread Tools Display Modes
  #1  
Old 07-10-2011, 01:30 PM
Bronze Member
 
Join Date: Aug 2010
Posts: 70
130gr ttsx, lapua, varget, 308 load

Sinclair has lapua 308 win brass $72.00 100 pieces also has the 308 palma on sale its a few dollars more. Ive never ued the lapua brass but for this price im going to try it. Thought soneone else might be intrested so I thought I would post this just in case. My question is has anyone loaded the 130 gr ttsx in 308 win with varget? I thought I might gain some velocity. I looked at barnes web site and printed out reload data. It only listed 2 powders. If you have reloaded 130ttsx in 308 win any replys or suggestions on different powder choices that worked well, and veolicty data would be greatly appreciated. Thanks
Reply With Quote
  #2  
Old 07-10-2011, 06:38 PM
Platinum Member
 
Join Date: Nov 2006
Location: Dayton, Nevada
Posts: 1,793
Re: 130gr ttsx, lapua, varget, 308 load

That's my wifes antelope round. 48-49g of Varget with the 130g TTSX works great.

Hodgon's online database shows tons of different powders for the 130g's.
Reply With Quote
  #3  
Old 07-10-2011, 09:47 PM
Platinum Member
 
Join Date: Jan 2011
Posts: 2,099
Re: 130gr ttsx, lapua, varget, 308 load

With the 130s compressed H4895 is the coldest id use, varget is to slow for the lightweights imo also Imr4198 is a good choice for the 130s or Benchmark.
Reply With Quote
  #4  
Old 01-01-2012, 12:30 AM
Junior Member
 
Join Date: Dec 2011
Posts: 1
Re: 130gr ttsx, lapua, varget, 308 load

Wildhog...I just read your post so this might be a moot reply. I load Barnes 130g TTSX for my 308 win. My rifle has a barrel length of 20 1/4 in and has a 1:11" twist rate. I have tried both Varget and 8208xbr but I get the best results from AA2230. I have a Chrony Beta Master Chronograph and get a MV of 3085 fps. I use Lapua brass; CCI 200 Large Rifle primers; 48.5g of AA2230 and I seat the bullets according to the Barnes reccomendations. My COL is 2.885 in. I had the good fortune this season to take a doe and a buck and both were down with one shot. If you have not already done so talk to the Tech guys at Barnes. They have always been happy to answer my questions and have been very helpful. I hope you find this useful.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: 130gr ttsx, lapua, varget, 308 load
Thread Thread Starter Forum Replies Last Post
TSX & TTSX 130gr for 300WSM Rev. Deer Hunting 4 03-08-2012 10:00 PM
300 RUM ttsx load amaasbball1 Long Range Hunting & Shooting 2 08-31-2011 10:43 PM
270WSM 130GR Barnes TTSX & 140GR Accubond pet loads eship Reloading 3 03-07-2010 09:40 AM
looking for load data for the 300 rem ultra mag and 130gr barnes Dr. John Reloading 11 03-14-2005 10:11 PM
257 Roberts Varget load for 120gr SGK?? Rifles, Bullets, Barrels and Ballistics 1 08-26-2004 11:02 PM

Current Poll
Do you watch outdoor shows live or by recording them?
Always recorded - 13.30%
110 Votes
Mostly recorded - 24.18%
200 Votes
Sometimes recorded - 14.51%
120 Votes
Rarely or never recorded - 48.00%
397 Votes
Total Votes: 827
You may not vote on this poll.

All times are GMT -5. The time now is 08:32 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC