110 gr vmax out of a .300 win mag

[Jimm]

Well thanks guys , Ihave used the info you gave me and loaded and shot a ladder test with the 110 vmax. Keep in mind that this test is not as conclusive as it could be simply because I did not use fresh components with cases neck sized only . What I did was to take some 10 yr. old loaded rounds pull the bullet , chuck the powder , dump a ladder test in the cases then reseat the bullets to the rifling seat length in my new LSR 300 winnie.Cases had been fired 3 or 4 times and full length sized with RCBS dies each time.So, they probably (the cases ) have a lot of issues at that point. Don't know for sure as I don't have my Neco case guage yet( but it's on it's way [img]/ubbthreads/images/graemlins/cool.gif[/img]).

Anyway, I said I would let you all know how it went with these little pills, so, here it is.
Jim [image]http://[/image] [image]http://[/image]

[sewwhat89]

Is load #7 the one to try and develop?

[Jimm]

#7 would be good ,thing is 8,9,10, probably would be good too when you consider driver error ,gusts of wind( note that wind was coming from the target to me slightly quartering). I am going to try 76.0 grs in the next phase of development.
Jim

[Jimm]

Ok,

Finally got the pic to load . This is the culmination of the ladder for the 110vmax , whhooiee and at 3600fps at that [img]/ubbthreads/images/graemlins/cool.gif[/img] [image][IMG] Please note that this group was shot with a 100 yd zero of 220 smkshttp://img.photobucket.com/albums/v632/hisgrace/a789a1b6.jpg[/IMG][/image] [image][/image]