close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Hunting > The Basics, Starting Out

Reply

Remington 700 Broker extractor

LinkBack Thread Tools Display Modes
  #8  
Unread 09-27-2006, 03:01 PM
Gold Member
 
Join Date: Sep 2003
Location: Nebraska
Posts: 810
Re: Remington 700 Broker extractor

I think i have posted this same subject before, i was a Remington repair station back in the 80's, i did at least one extractor replace a week! Most were not broken, they just don't work. All were mag calibers 700models. I started offering the AR-15 replace, most just wanted the gun fixed back to original. I had several guys call me from the middle of no where during elk season with a stuck case in the chamber and the extractor slips off, this was the basic problem of the 700's ive seen. I have put in many Sako refits also, i have never seen one come out or being blown out, but if its not fit right by the gunsmith anything is possible. The only thing i dont like about the re-fit is the ejection is higher and the cases will hit the scope turrets on some scope types, but they will put out some very hot loaded cases.
__________________
www.cowboy-dave.com

"Let the good times roll"
Reply With Quote
  •   #9  
    Unread 11-01-2006, 11:31 AM
    Bronze Member
     
    Join Date: Aug 2005
    Location: Saskatchewan, Canada
    Posts: 48
    Re: Remington 700 Broker extractor

    I looked in the Badger Ordnance website and 2004 product catalog but i am unable to find the extractor for the remington 700? any help in finding this product would be helpful, what does this cost?

    Thanks
    __________________
    Improvise, adapt and overcome
    Reply With Quote

      #10  
    Unread 11-02-2006, 05:23 PM
    Gold Member
     
    Join Date: Sep 2003
    Location: Nebraska
    Posts: 810
    Re: Remington 700 Broker extractor

    Its replacement extractors for Sako rifles, look in the Brownells cataloge or on line. Only draw back is the ejection is higher than factory, it will through cases up to large scope turrets. But the positives out weigh the negatives!
    __________________
    www.cowboy-dave.com

    "Let the good times roll"
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: Remington 700 Broker extractor
    Thread Thread Starter Forum Replies Last Post
    m16 extractor??? yzm19 Gunsmithing 6 10-24-2009 01:33 PM
    Need Extractor Dave in Idaho Gunsmithing 2 10-18-2007 07:02 AM
    Sako extractor briandolinsky The Basics, Starting Out 4 09-04-2006 08:26 AM
    Extractor??? TireurDelite Rifles, Bullets, Barrels & Ballistics 1 05-16-2006 08:43 PM
    Extractor problems johnny k. Rifles, Bullets, Barrels & Ballistics 11 09-11-2004 11:00 PM


    All times are GMT -5. The time now is 06:47 PM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC