Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Hunting > The Basics, Starting Out


Reloading equipment

LinkBack Thread Tools Display Modes
Unread 03-05-2002, 07:07 PM
Bronze Member
Join Date: Dec 2001
Posts: 98
Re: Reloading equipment


I loaded some .270 loads the other night using my Co-Ax, grabbed my RCBS competition seater with the Forster ring, popped it in, seated my bullets. Grabbed my stoney point comparator just to double check the seating depth since I'm right to the lands. Exactly, to the thousandth, the same as the last batch I loaded. As a matter of course I always double check seating depth, but that's just cuz I'm anal. If the locking ring is snug, my experience is that no adjustment is needed.


[ 03-05-2002: Message edited by: rogerinneb ]
Reply With Quote

Unread 03-05-2002, 11:26 PM
Silver Member
Join Date: Dec 2001
Posts: 469
Re: Reloading equipment

What about with other single stage presses, is it easy to reinstall the dies to the same settings?
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: Reloading equipment
Thread Thread Starter Forum Replies Last Post
WTB: Reloading Equipment, Need Everything... Scott300RUM Reloading Equipment and Components 8 03-11-2012 12:48 PM
Reloading equipment thebuster Reloading Equipment and Components 0 08-25-2008 04:34 PM
FS - Reloading Equipment acloco Reloading Equipment and Components 3 10-09-2007 10:30 PM
Reloading equipment Crawfish Reloading 9 09-07-2007 09:15 AM
reloading equipment treed Reloading 4 02-06-2007 08:28 AM

All times are GMT -5. The time now is 06:33 PM.

Powered by vBulletin ©2000 - 2015, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC