Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Hunting > The Basics, Starting Out


Reply

Once Fired Brass

 
LinkBack Thread Tools Display Modes
  #1  
Old 04-05-2003, 02:46 PM
Gold Member
 
Join Date: Sep 2001
Location: North, Texas
Posts: 609
Once Fired Brass

Has anyone had experience with high pressure brass that has been fired? High Tech has a good deal on some but, before buying it wanted imput. Thoughts or knowledge would be helpfull.
__________________
Courage,Spirit and Honor
Pass It On
Reply With Quote
  #2  
Old 04-05-2003, 03:53 PM
 
Posts: n/a
Re: Once Fired Brass

If it is for a belted magnum and your chamber is minumum spec. you might have a hard time sizing it down enough to fit your chamber. I bought some once fired Norma brass for my 300 Win Mag and even with the sizer all the way down to the shellholder plus alittle more camming over it still chambers hard. It is about .001 larger above the belt than fired new brass which chambers easily. For a factory rifle it might not be a problem. This has been my only experience with once fired brass. Hope this helps some.
Wayne
Reply With Quote
  #3  
Old 04-14-2003, 05:06 PM
Writers Guild
 
Join Date: Jul 2001
Posts: 1,459
Re: Once Fired Brass

Depends on the chamber and type of firearm the brass was shot in.

I am guessing that you are looking at 308 or 223 surplus brass? Find out if this is factory range brass or military brass.

If fired from a machine gun, there may be alot of case stretching which will lead to very short case life. If fired from test barrels or bolt actions, then usually not that big a deal. You may need to get a small base die if your chamber is small.

More details are important.

I would suggest that you look at pulldown brass. This is brass that was disassembled, not fired. These are usually in excellent condition and just need the crimps removed.

If trying for max accuracy, I would lean towards commercial brass. I use LC69 brass in my 30-06 and it works great but would not use it for match applications. For LR hunting/varminting/plinking, no problem. Capable of under 1/3moa accuracy.

Good luck...

Jerry
Reply With Quote
  #4  
Old 04-14-2003, 05:15 PM
Gold Member
 
Join Date: Sep 2001
Location: North, Texas
Posts: 609
Re: Once Fired Brass

Jerry its 30-06 brass from Hi-Tech ammo the price is good on it. That's why I was wondering if someone could push the enevolpe a little farther since it was high pressure.
Jerry the site if it helps [URL=http://iidbs.com/hitec/]

[ 04-14-2003: Message edited by: texas ]
__________________
Courage,Spirit and Honor
Pass It On
Reply With Quote
  #5  
Old 04-15-2003, 09:35 AM
Writers Guild
 
Join Date: Jul 2001
Posts: 1,459
Re: Once Fired Brass

Texas, I would look for pulldown brass. Try Weideners, Bartlett reloading, Pats reloading, and other surplus powder/component supplier.

I bought my brass from Weideners. It was LC69 and I couldn't be happier. You will need to do some work prepping the primer pockets, and necks but it is very tough and accurate. I do not sort the brass and it can shoot sub 1/3 MOA at LR.

For the slight increase in price (costs about 10cents each delvd.), why deal with once fired brass of unknown history. I believe that Bartlett reloading will even do some prep work for a few pennies more per piece.

This is what I use in my hunting rifle and 30 Gibbs.

Good stuff...

Jerry
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Once Fired Brass
Thread Thread Starter Forum Replies Last Post
Once fired brass sticking (that was fired from the same rifle?) Wookie316 Reloading 10 05-13-2012 07:02 AM
.38 Spl Brass Once Fired snipes Reloading Equipment and Components 0 07-31-2011 01:38 PM
New Brass VS. Once Fired Brass Velocity Cordell Reloading 1 11-08-2009 04:33 PM
FS: 7mm RUM once fired brass bailey1474 Reloading Equipment and Components 0 05-13-2007 07:58 PM
WTB- 300RUM brass. once fired, twice fired, three times.... Mountain Man Guns For Sale 5 07-31-2003 07:03 PM

Current Poll
Do you wear hearing protection while hunting?

All times are GMT -5. The time now is 07:29 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC