Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Hunting > The Basics, Starting Out


Reply

Oehler 35P Chony

 
LinkBack Thread Tools Display Modes
  #8  
Old 09-05-2003, 10:50 AM
Platinum Member
 
Join Date: May 2001
Location: Sask. Canada
Posts: 2,410
Re: Oehler 35P Chony

I checked the Oehler site and they send a two foot piece of conduit with each machine, the four foot is optional. Here is a link: http://www.oehler-research.com/cgi-l...55a+1076702455
Reply With Quote
  #9  
Old 09-05-2003, 05:12 PM
Platinum Member
 
Join Date: Jun 2001
Location: Palmer, Alaska
Posts: 2,539
Re: Oehler 35P Chony

I'll second what Ian said, their stands and also the printer version are the best way to go.

Here's something i do to get the screens lined up PERFECTLY by yourself, the FIRST time:

Take a piece of WHITE cardboard, don't have to be very big, just big enough that you can cut a slot in it wide enough to slip over the stock above the grip or butt while gripping it so it stands up vertically behind the scopes occular lense and you can see white through it when out at the screens adjusting them.

Set the power ring on the scope to max power (though this won't make any difference if the crosshair is in the first focal plane) and line up the crosshairs on the targets bullseye, now don't move the rifle.

Now, with your eyeball looking back through the scope tube from the center of each screen, line up the vertical crosshair that should now contrast very well with the white background with the center of the MUZZLE and move the screen left or right to center the bore line over each screen. I use my finger held out up above the center of each screen as a kind of sight if needed. Helps to first get the screens roughly adjusted so the bullet path will be 6-8" above end screens, do your line up then go back and get the rail as parelell to the bore line as possible, then double check alignment again. If everything is perfectly aligned looking back from the screens to the bore and crosshair, it will be perfect when you look back through the scope on low power. You may have to tip the rifle forward keeping the vertical crosshair on the bull while verifying it's in the center of the screens, just depends on how low you like to set the screens and how low of power setting you have.

Once the rifle is setup in the rest, I can have the hight and alignment of the screens set and ready in less than a minute, quite a bit faster than running back and forth looking through the scope each time an adjustment is made to a screen, which on the other hand can be quite time consuming. Not to mention other people at the range will probably be "waiting" on you, hoping to shoot... sometime this century. [img]images/icons/grin.gif[/img]
__________________
Brent Moffitt
Reply With Quote
  #10  
Old 09-05-2003, 05:53 PM
Platinum Member
 
Join Date: May 2001
Location: Sask. Canada
Posts: 2,410
Re: Oehler 35P Chony

Brent,
A while back I sent you a note on my newly developed method of setting up Oehler Skyscreens, did you not receive it?
If not have I got a good one for you...
Reply With Quote
  #11  
Old 09-05-2003, 06:16 PM
Silver Member
 
Join Date: Mar 2002
Location: Central Minnesota
Posts: 429
Re: Oehler 35P Chony

Thank You Brent and Ian.
__________________
a whisper from this little friend of mine goes a lot way.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Oehler 35P Chony
Thread Thread Starter Forum Replies Last Post
Oehler 35 $$$$$ SHRTSHTR Rifles, Bullets, Barrels and Ballistics 15 07-01-2011 10:29 AM
Oehler 35 P Jimm Equipment Discussions 10 01-10-2006 08:29 PM
Just got my Oehler 35 General Discussion 7 05-24-2005 11:21 PM
Looking for Oehler 35P FatBoy... Guns For Sale 8 02-08-2003 11:56 PM
WTB: Used Oehler 35P PrimeTime Guns For Sale 1 02-11-2002 11:10 PM

Current Poll
Where in the US do you live?
West of the Mississippi River - 61.14%
930 Votes
East of the Mississippi River - 36.62%
557 Votes
On the Mississippi River on a houseboat - 2.24%
34 Votes
Total Votes: 1,521
You may not vote on this poll.

All times are GMT -5. The time now is 11:04 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC