need Nosler Accubond data for 300RUM

[sure shot]

I have a few loads with the 200gr Accubond. I'm having such good luck with the 200gr that I Haven’t even bothered with the 180gr
The 200's are very Accurate, 1/2 groups fast also. I like the heavier slugs in .300 RUM 200 & 220 wish I could get 250gr pills.

1. Case: Rem
Primer: Rem Mag
Powder: R22 85.5gr
Bullet: Accubond 200gr
Seat: 3.635
firearm: Rem Sendero SF 26' bbl

No signs of pressure with this load and is NOT A MAX LOAD. 1/2in groups @100 yards. Clocked them @3137fps.

2.Case: Rem
Primer: Rem Mag
Powder: Retumbo 94.0gr
Bullet: Accubond 200gr
Seat: 3.635
firearm: Rem Sendero SF 26' bbl

No signs of pressure with this load either and is 2.0gr under MAX in my rifle 1/2in groups @100 yards. Clocked them @3188fps.

All test done with Crony Alfa Master 15 feet from the muzzle.

[bigjay]

I am wanting to try loading the Nosler Accubond 180gr in the 300RUM, but cannot find any data. Nosler does not have any data listed on Accubond yet and I am not sure about trying the Accubond with data from their other bullets. Has anyone successfully loaded Accubond?

[Willy 1]

BigJay The load that I found best in my Rem 700 pss with the 180 gr accubonds is .
Brass Rem
Primer Fed gm215m
Powder H 1000
Gr 90.5
OAL 3.730
Vel 3199
I tried up to 93 grs with the H 1000 before I started having pressure signs , so maybe start a little under the 90 gr mark and work your way up . The H 1000 was not the fasted powder I tested but it seemed to be the most accurate .

[bigjay]

Thanks for the data from both. Can't wait to try some loads with accubond. Maybe over the weekend. I'll be sure and post my results when I do. Have had good results with Scirrocco 180gr. and been wanting to try accubond, so here goes.