Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Hunting > The Basics, Starting Out


Reply

Load Development Questions.

 
LinkBack Thread Tools Display Modes
  #1  
Old 04-23-2003, 02:27 PM
Silver Member
 
Join Date: Mar 2003
Location: PA
Posts: 194
Load Development Questions.

I have been trying to develop a good load for my 300 win mag. This is the most frustrating process ive dealt with. Do I start with picking a powder charge and ignore seating depth. Do I pick a bullet first. Do I try 10 differnt bullets and pick the best one. This process seems to be very long and frustrating.
What process do you guys follow when starting out. Any advice will help.
Reply With Quote
  #2  
Old 04-23-2003, 03:33 PM
Silver Member
 
Join Date: Mar 2003
Location: Schofield, WI.
Posts: 323
Re: Load Development Questions.

Samson, Boy I love to talk reloading, I'd first figure out what kind of shooting your going to be doing ie; deer, elk, speedgoats, LR, etc. I'd go with something like 180gr or above with the 300winnie, and try some H1000 or H4831sc, Retumbo should work great with the 190-200gr bullet. As far as bullets go, you can't go wrong Sierra 190gr or 200grain MK or 180gr SST, 190gr BTSP Hornady, the latter as grouped very well out of my '06'. As far as seating depth, you can start by seating them .005-.010" off the lands and work down from there to see any accuracy gains. That kinda stuff isn't near as important as holding the rifle still. [img]images/icons/grin.gif[/img]. If you noticed some of the threads here you've seen where a Hornady bullet prefers to be seated closer to the lands, and Sierra seems to be much less fussy, I can concur with that. Something to keep in mind. Jay [img]images/icons/cool.gif[/img] Good Luck!
Reply With Quote
  #3  
Old 04-23-2003, 06:21 PM
Gold Member
 
Join Date: Apr 2003
Location: North Carolina
Posts: 528
Re: Load Development Questions.

samson...I would start with the 'ol reliable MatchKing!!
You are trying to feel out what the rifle likes, and practice shooting the thing to get consistant. Right???
My Sako 300WM loves 150gr. MK's with 75-76gr. of Rl22...load BELOW that to start!!!
180gr. MK's w/ RL25 about 80gr. and Win primers, same deal, load below!!
These bullets will allow you to get good groups, and get confidence, and instant gratifacation!!
Match Kings, are just super....Hunting bullets, are anougher story for my Winnie..
Likes the Pro Hunter, 180gr. hates SST's, Scirocco's are not real consitant...
Basically, try loading the MK's first, they WILL shoot in your rifle....guaranteed!!!
[img]images/icons/wink.gif[/img]
__________________
It's only rock and roll....But I like it!
Reply With Quote
  #4  
Old 04-23-2003, 06:24 PM
Gold Member
 
Join Date: Apr 2003
Location: North Carolina
Posts: 528
Re: Load Development Questions.

And remember, its a journey, Relax...have fun..I know that you will report succses w/ Sierra's...I just loaded some 150gr. MK's to take out tomrrow....sakofan.... [img]images/icons/grin.gif[/img]
__________________
It's only rock and roll....But I like it!
Reply With Quote
  #5  
Old 04-24-2003, 12:45 PM
Silver Member
 
Join Date: Mar 2003
Location: PA
Posts: 194
Re: Load Development Questions.

I forgot to ask if you recommend crimping or not.
Reply With Quote
  #6  
Old 04-24-2003, 02:15 PM
Junior Member
 
Join Date: Apr 2003
Location: Florida
Posts: 28
Re: Load Development Questions.

SAMAON, emial me, I've got some 300 RUM development data in a 1-2-3 spreadsheet.
Reply With Quote
  #7  
Old 04-24-2003, 04:59 PM
Junior Member
 
Join Date: Apr 2003
Location: Reno, Nevada
Posts: 13
Re: Load Development Questions.

Samson:
No Crimping necessary. This is what I do to work up a load from scratch:
1) Start by arbitrarily selecting a bullet that fills your general needs as Gorski has advised. Arbritrarily select the type of powder your would like to work up & arbitrarily select a primer & Case.
2) I start with at least 200 identical cases (manufacture, # of times fired, ect). I then size and trim them all to uniformity in an attempt to eliminate one variable.
4) I prime 100 of the cases with the same primer, thereby eliminating a second variable.
3) I then review published load data. You will find most all published data will provide you a minimum charge and maximum charge for your cartridge, bullet weight & primer. I start with a charge at approx 1/3 of the way between min & max. & charge 50 of your primed, sized cases with the same charge, thereby eliminating a third variable.
3) I then seat seven separate strings of five cartridges varying the overall cartridge length. Maximum length should be approx. 0.020" off lands. You might want to purchase a Stoney Point Gage to accurately know this dimension. (Keep in mind that sometimes a rifle will chamber a cartridge that is too long for your magazine. If so, you have a decision whether or not you like a single shot rifle or not?)I very the depth by shortening each string by a fixed amount such as 0.005" per string.
4) You then have 35 loaded cartridges. The remaining 15 cases I load as 'Foulers' and I am not concerned with uniformity of these foulers as they are not recorded at the range anyway.
5) Next I load up my goodies and head to the range. I shoot 3 foulers then the first string of 5, clean the gun, shoot 2 foulers and the second string of 5, ect.
6) I pick the OAL and with the best five shot grouping (optimal) then repeat the loading process verying charge, working my way up from minimum to maximum.
7) After I have found the optimal OAL & charge, I very the primer types.
8) I then make suttle changes to each to fine tune the load.

Obviousely the trick is to keep all but one variable constant in an effort to find the optimal. Its a long process, but it gives you plenty of chances to shoot which is ultimately the goal.
__________________
Going to War without the French is like going hunting without your accordion
-- Gen. Norman Schwarzkof
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Load Development Questions.
Thread Thread Starter Forum Replies Last Post
Kirby Allen’s “no load development” load development method. WildcatB Reloading 70 09-24-2012 06:01 PM
.243 load development ajridgedell Reloading 14 01-23-2011 08:55 PM
load development jimbothepunk Reloading 0 09-15-2010 01:34 AM
questions on 7mm RUM load development boyce Reloading 0 07-24-2010 03:46 PM
.308 Load Development? TacticalHits Reloading 13 12-08-2008 01:15 PM


All times are GMT -5. The time now is 03:19 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC