finally i found a place where me and a friend can stretch our TRG42 out and beyond 1200meters so i just want to check that i got all this square. i watched Shawns video and from what i can make out
1)i have to set the screen of the Barometric pressure on Exbal to a reference of '0' feet to get raw pressure reading from kestrel
as shown here
2) I then went on the other screen the Altitude screen and entered the pressure reference given by the weather station in my area close to the airport. this was 30.47inHG. it is now showing an Altitude of 1340ft.
this is the part im not sure about, in this screen which reference should I input? the one from the regions airport station(30.47inHG) or the raw station pressure i just got when i referenced to 0 feet?(29.03)
3)then i went to Exbal to 'field conditions' and entered all the information with 0 for elevation
i unchecked the 'calculate standard pressure' too.
IS this the proper way it should be done?
Now i just need to validate trajectory if the process is correct.