Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Hunting > The Basics, Starting Out


Developed a flinch, need help

LinkBack Thread Tools Display Modes
Unread 05-17-2012, 01:36 PM
Platinum Member
Join Date: Dec 2011
Location: S.E. Michigan
Posts: 3,747
Re: Developed a flinch, need help

I developed a flinch, not from recoil but trigger anticipation. Was easy to cure. Just modified the trigger pull (less) a bit. I have no issue with any accutrigger, I set them to pull light.

Most factory triggers flat suck in stock form. Especially on a pistol and especially factory Rugers. Every late build Ruger I've tried begs to be a 2 finger (to pull) trigger way too much side slop and creep, all fixable with a little time, some careful stone work and appropriate shims.
Reply With Quote



Thread Tools
Display Modes

Similar Threads for: Developed a flinch, need help
Thread Thread Starter Forum Replies Last Post
New bipod being developed. Len Backus General Discussion 13 01-17-2010 07:13 PM

All times are GMT -5. The time now is 06:25 AM.

Powered by vBulletin ©2000 - 2015, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2015 Long Range Hunting, LLC