Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Hunting > The Basics, Starting Out


Case Life Expectancy

LinkBack Thread Tools Display Modes
Unread 02-12-2009, 10:30 PM
Gold Member
Join Date: Aug 2008
Location: east central fl. /n.c. pa.
Posts: 844
Re: Case Life Expectancy

i am a firm believer in full legnth resizing of ammo used for hunting. since im strictly a hunter, i full legnth all my loads. that said, there are steps to be taken to assure straight loads. although ive been using r.c.b.s. dies for years, i would advise getting better dies. as bob said, there are excellant threads here on loading. dont rush into buying that equiptment.

i would figure on doing at least some neck turning. a collet type sizing die and competition seater would also make sence. but read first, then decide.

your spending all this on rifles, what about the important stuff, binnoculars. what are you using?
Reply With Quote



Thread Tools
Display Modes

Similar Threads for: Case Life Expectancy
Thread Thread Starter Forum Replies Last Post
Brass life expectancy. Uncle Russ Long Range Hunting & Shooting 11 01-31-2009 08:05 PM
7mm RUM case life 180pilot Reloading 10 11-07-2005 06:40 PM
Different bushings throughout case life? arthurj Reloading 3 06-13-2005 09:14 PM
case life jacack Rifles, Bullets, Barrels & Ballistics 1 03-13-2003 05:59 PM
30-378 case life Len Backus Rifles, Bullets, Barrels & Ballistics 13 06-25-2002 11:00 PM

All times are GMT -5. The time now is 06:28 AM.

All content ©2010-2015 Long Range Hunting, LLC