Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Hunting > The Basics, Starting Out


Reply

Caliber questions

 
LinkBack Thread Tools Display Modes
  #1  
Old 01-13-2009, 05:59 AM
Junior Member
 
Join Date: Dec 2008
Location: Northern Cali
Posts: 10
Caliber questions

I am planning on having a custom rifle built. Took a nice little blacktail at 740 yards in October with a friends .300 Jarrett. Now the long range bug has bitten me. I would like a 30 cal that I can shoot with factory ammo though. I haven't started handloading yet, but plan to. My problem is which .30 cal. I am considering 300 weatherby, 300 win, and 300 ultra mag. What are the pros and cons of each? I plan on having a brake son recoil isn't really an issue. I have a 300 weatherby ultralight, but its now all that fun to shoot. Plus it doesn't really balance all that well with that thin barrel, so I plan to sell that one. I've searched and read numerous posts, but I would like some opinions on the three calibers that I am considering. Thanks for any responses. This site is great. I have spent so much time reading what others have posted, I think I have have overloaded my little brain with too much info.
Reply With Quote
  #2  
Old 01-13-2009, 12:10 PM
Gold Member
 
Join Date: Dec 2007
Location: Sagauache County, Co...3170 sq miles, not a single stop light!
Posts: 667
Re: Caliber questions

Those bugs in Cal do bite bad. You prob have a very virulent strain of the LRH disease. My suggestion would be to buy a Rem sendero in 300 RUM. It is prob the best, most hard hitting round of the ones you mentioned, and there are lots of factory load options. That just might keep the symptoms at bay until you can do a full bore custom built by Kirby Allen, or one of the other good smiths here. Good luck with your choice and welcome to LRH.com. AJ
Reply With Quote
  #3  
Old 01-13-2009, 12:39 PM
Platinum Member
 
Join Date: Feb 2007
Location: Townsend, Montana.
Posts: 7,739
Re: Caliber questions

I am going to put in a vote for the 300 Win Mag. Since you are going to shoot factory ammo for a while you will for sure appreciate the cost and selection of the available ammo. You can also select a factory ammo that utilizes good brass and save it for the day you start reloading. Since the 300 win is so popular you gan also choose some factory match ammo.

Bottom line is, they are all .308 cal and if you are going to go for 1000 yards or farther you will probably be shooting a 190 to 210 gr bullet. Since you will be dialing the scope for each shot distance, velocity is not an issue. 2900 FPS is all that is needed to get a 210 out to almost a mile and still be supersonic.

The 300 win brass and barrel will last you a great number of shots and also is a joy to shoot.

We just made the same decission and we are very happy with the win.

Jeff

.
__________________
Reply With Quote
  #4  
Old 01-13-2009, 06:25 PM
Junior Member
 
Join Date: Dec 2008
Location: Northern Cali
Posts: 10
Re: Caliber questions

Thanks for the responses. I have looked at the sendero and read many posts praising it as a great off the shelf rifle. The price is appealing too. On the other hand, having a rifle built to my specs is very appealing regardless of the price. Hell, I never could leave my early broncos alone despite the fact that they performed great as it was.

I know a guy out here that has built several custom rifles for friends, all that shoot extremely well. 2 friends have made 1100-1200 yard kills. I took my 740 yard buck with one of those rifles. Sure was nice shooting that thing.

I've read alot about barrel length, but I guess I will bring it up again. What is the minimum functional length for the 3 calibers that I have mentioned? I don't want to short change the performance, but I want to maximize performance. I am looking at taking this rifle deep into the backcountry, mostly on foot so as much as I would like one of those 15 pound beasts I don't think my legs would like that. I go light to ultralight with most of my hunting gear. Thats why I originally purchased my weatherby ultralight, much to my nose and brows detriment.

I will probably start buying reloading equipment within a few months. Does any of the calibers that I listed suffer from a shortage off good brass?

Thanks again for the replys.
Reply With Quote
  #5  
Old 01-13-2009, 06:36 PM
Silver Member
 
Join Date: Jan 2008
Location: new jersey
Posts: 162
Re: Caliber questions

Hi subjb!How about just rebarreling your .300 weath. mag. with a custom barrel+muzz.brake? Use the current stock(open barrel channel).Barrel,brake,smithwork=800.00+. All the 300 mags factory ammo are 60.00+for premium bullets.I am currently doin the same thing!
Reply With Quote
  #6  
Old 01-13-2009, 09:38 PM
Junior Member
 
Join Date: Dec 2008
Location: Northern Cali
Posts: 10
Re: Caliber questions

Dskiper, I looked at rebarrelling my weatherby but found out that my stock won't accept a larger contour. I guess the ultralight weatherby's have their own specific stock. It also sounds like the Mark V action are a pain for gunsmiths to work on, so I was planning on a Rem 700 action or a custom.

Oh yeah that leads up to another question. For anyone that might be able to answer it. Are weatherby's inherently less accurate due to the freebore? Is that just the Mark V action or is it the caliber? I know the Vanguards get some pretty good accuracy with the weatherby calibers. I do like the .300 weatherby, just not my ultralight.
Reply With Quote
  #7  
Old 01-14-2009, 10:07 AM
Platinum Member
 
Join Date: Mar 2007
Location: MN
Posts: 1,219
Re: Caliber questions

Of the three cals listed, the WBY mag is the last one I'd recomend. Reading Jarret's own website and the reasons for making the jarret reminded me of one of the wby downfalls. Freebore. Ammo is expensive for the wby mags. I think Broz had a good point with the standard win mag. This is a very good round with lots of available brass from winchester AND lapua. It is an outstanding cartidge. If you insist on getting more power, than the RUM would be a good choice. Rem senderro's have good stocks, and are known to be pretty accurate. If you are looking to go for a custom and want to spend 1500 + on the rifle, than I'd suggest a custom action right away often if you have to purchase a rem 700 action and get it trued you will wind up spending as much as if you would have simply purcased a custom in a 700 configuration.
__________________
I used to re-load but now I "hand-load".
-- Well, at least I try --
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Caliber questions
Thread Thread Starter Forum Replies Last Post
Rem 700 Sendero caliber swap questions MudRunner2005 Long Range Hunting & Shooting 50 01-24-2013 05:21 PM
caliber questions... the shotty Long Range Hunting & Shooting 6 06-26-2011 07:51 PM
barrel life/ caliber questions to help with next build lovdasnow Rifles, Bullets, Barrels and Ballistics 19 06-14-2009 11:36 AM
Caliber Questions Dano5001 Rifles, Bullets, Barrels and Ballistics 6 10-08-2008 08:24 AM
2 questions: Ruger Express and caliber choice hoser Long Range Hunting & Shooting 9 04-04-2004 09:44 PM

Current Poll
I currently have hunting preference points in the following states

All times are GMT -5. The time now is 10:23 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC