Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Hunting > The Basics, Starting Out


Bullet Coatings

LinkBack Thread Tools Display Modes
Unread 03-01-2004, 04:08 AM
Platinum Member
Join Date: Jun 2001
Location: Palmer, Alaska
Posts: 2,539
Re: Bullet Coatings

Tungsten disulfide will not build up and adhear to itself, moly will, there lies one benifit in it over moly.
Brent Moffitt
Reply With Quote

Unread 03-01-2004, 03:28 PM
Platinum Member
Join Date: Dec 2001
Posts: 1,013
Re: Bullet Coatings

I used to moly but found no advantage. Have to use alittle more powder to get the same velocity. When I'm out varmit shooting I may get to clean about every 100 yds sometimes may be 150, at some point when moly is use you will have JB your bore. Moly layers, maybe some of the new things will eliminate that. For me when I make a change it has to be for the better say group size not cleaning. Just my .02 worth
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: Bullet Coatings
Thread Thread Starter Forum Replies Last Post
Gun Coatings HUNTNMOON Long Range Hunting & Shooting 3 07-12-2011 05:41 PM
teflon,kg,gun coatings last against abrasion? slg888 Rifles, Bullets, Barrels & Ballistics 1 01-24-2009 08:36 AM
Teflon coatings?? Equipment Discussions 11 08-19-2004 09:24 PM
Bullet coatings..Danzac, etc. Rifles, Bullets, Barrels & Ballistics 10 05-21-2003 11:45 PM
Danzac or other non moly coatings Randy in Va Rifles, Bullets, Barrels & Ballistics 2 11-17-2002 10:07 PM

All times are GMT -5. The time now is 07:26 AM.

Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2015 Long Range Hunting, LLC