Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Hunting > The Basics, Starting Out


Browning Recoil Pad

LinkBack Thread Tools Display Modes
Unread 08-28-2006, 06:18 PM
Silver Member
Join Date: May 2006
Location: Port Angeles, WA
Posts: 244
Browning Recoil Pad

I have a Browning A-bolt with a wood stock and am trying to take the factory pad off and I think that it is glued on. Anyone on here know how to get them off??? Heat? Cut it? Don't want to hurt the wood so I figured that I would ask on here.

Joe Oakes
Reply With Quote
  •   #2  
    Unread 08-28-2006, 11:10 PM
    Gold Member
    Join Date: Jan 2005
    Location: Western MI
    Posts: 718
    Re: Browning Recoil Pad

    Should be secured by 2 wood screws through the pad. Take a close look, the rubber may have sealed up the holes.

    Reply With Quote

    Unread 08-29-2006, 10:35 PM
    Gold Member
    Join Date: Apr 2006
    Location: Alberta
    Posts: 868
    Re: Browning Recoil Pad

    I've got an a-bolt also, although mine is synthetic stock. You should see 2 shallow depressions in the pad where the screws are located. With mine I cut through that area with a utility knife. Once cut through I was able to easily remove the two screws.
    Reply With Quote
    Unread 04-11-2011, 07:47 AM
    Silver Member
    Join Date: Nov 2010
    Posts: 239
    Re: Browning Recoil Pad

    same thing here no screws . and no soft spots in the pad . is a wood stock different ?
    Reply With Quote
    Unread 04-22-2011, 08:11 PM
    Bronze Member
    Join Date: Oct 2010
    Posts: 37
    Re: Browning Recoil Pad

    should be screwed on you want a large philips screwdriver vasoline or grease the shaft, the holes will be about 1-1.5 inches from the edge. can you post a picture of the butpad?
    Reply With Quote


    « 1x8 twist | Rings »
    Thread Tools
    Display Modes

    Similar Threads for: Browning Recoil Pad
    Thread Thread Starter Forum Replies Last Post
    .300 RUM Recoil wstribrny Rifles, Bullets, Barrels & Ballistics 13 03-21-2011 06:34 PM
    Gun recoil Clint Tyler Rifles, Bullets, Barrels & Ballistics 8 01-30-2009 06:59 AM
    recoil lug jig archdlx Gunsmithing 1 05-16-2008 09:06 PM
    Best Recoil Pad ? Varmint Hunter General Discussion 8 05-09-2006 07:52 PM
    7MM RUM recoil?? Pat S. The Basics, Starting Out 8 10-28-2004 02:09 PM

    All times are GMT -5. The time now is 12:37 AM.

    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC