Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Hunting > The Basics, Starting Out


brass polishing

LinkBack Thread Tools Display Modes
Unread 04-23-2003, 08:16 PM
Silver Member
Join Date: Feb 2002
Location: Wyoming, USA
Posts: 172
Re: brass polishing

I use a vibratory unit also. Very satisfied.

I have read much ado about using tumblers, either style, and the damage they do to the necks of the brass. I have never been able to see any such damage and I have a hard time believing that a vibratory cleaner will cause a substantial change in the structural integrity of good quality brass.

I would be interested in other's opinions on this topic.

Reply With Quote

Unread 04-24-2003, 06:49 AM
Posts: n/a
Re: brass polishing

thanks again.
Reply With Quote
Unread 04-24-2003, 10:31 AM
Junior Member
Join Date: Aug 2002
Location: AZ
Posts: 4
Re: brass polishing

I'm sure most of you already know this but I just found out that you can buy large bags of crushed corn cob at most pet stores. You can usually find it with the bedding for rabbits. I bought a ten pound bag for six dollars and it works great.....
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: brass polishing
Thread Thread Starter Forum Replies Last Post
Brass polishing adice captnmo Reloading 10 04-07-2011 06:52 AM
Lug raceway polishing? fireroad Gunsmithing 3 12-11-2010 11:48 PM
polishing the throat?? Frank7mm Gunsmithing 1 04-30-2010 05:00 AM
Chamber polishing coupalr Rifles, Bullets, Barrels & Ballistics 2 11-23-2005 08:21 AM
Polishing media additive? moosehunter Rifles, Bullets, Barrels & Ballistics 2 08-11-2002 04:32 AM

All times are GMT -5. The time now is 10:37 PM.

All content ©2010-2015 Long Range Hunting, LLC