close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Hunting > The Basics, Starting Out

Reply

The basics when choosing a gun and a certain bullet to reload

LinkBack Thread Tools Display Modes
  #1  
Unread 12-21-2009, 03:25 AM
Junior Member
 
Join Date: Dec 2009
Posts: 1
The basics when choosing a gun and a certain bullet to reload

So im new here guys and getting more into shooting () but i was wondering if i could get some insight on a few things

one, the rifle im looking at getting is a Rem 770 in 7mm rem mag, it has a barrel twist of 9 1/2 or 3/4, and the berger 180grain VLD HPBT bullet id like to reload into an accurate load and practice with recommends a 9 twist, will the rem 770 be able to stabilize it?

two, if i simplified it and went with the .030 decrease in BC and got the 168 VLD HPBT berger bullet which recommends a 10 twist, a 93/4 or 1/2 would stabilize it well right?

three, what exactly is the difference between say a Berger Target 168 gr VLD HPBT vs a Berger Hunting 168 gr VLD HPBT, jacket different right?

hope to join the long range club eventually
Reply With Quote
  •   #2  
    Unread 12-21-2009, 08:14 AM
    Bronze Member
     
    Join Date: Nov 2007
    Posts: 78
    Re: The basics when choosing a gun and a certain bullet to reload

    I wouldn't recommend that 770 to anyone but my worst enemy. The samples i handled and saw ran 100% failure to feed. The bolt was so sloppy that it would bind and sometimes override the cartridge. For what its worth, they seemed to shoot ok, but ugh??

    For budget shooting, get a Savage. When you outgrow it, it will serve as a good platform to customize. Below is a great article in the tech forums with practicable advice.

    Long Range Hunting Rifle On A Budget

    7mm rem mag will do it. So will the Berger. For a newbie, you are splitting hairs looking at BC that closely. BC is just a guage to compare one bullet to another and needs real world verification.

    Go forth and shoot.... a lot.....with whatever quality bullet you choose. When you get to 5-600 yds consistently, then look at changing bullets.
    Reply With Quote

      #3  
    Unread 12-21-2009, 08:31 AM
    Platinum Member
     
    Join Date: Mar 2007
    Location: MN
    Posts: 1,219
    Re: The basics when choosing a gun and a certain bullet to reload

    hello and welcome to LRH.com. If you are buying the rifle, I'd stay away from the 770 because the barrels are pressed in, can not rebarrel them. If you already own it... no problem, some of the are reasonably good shooters. According to rem site, they have a 9.25" twist, berger says they need 9 for the 180 and 10 for the 168 so you better stick to the 168.

    Now, the berger bullets generally like to be seated right to the lands and that may not be possible w/ a factory rifle due to the freebore (rifle is usually held farther down the barrel in a factory rifle).

    the difference in the BC is not as big a deal as some may say... especially to a beginner at the game. Pick a bullet that will shoot good in your rifle and start practicing.
    __________________
    I used to re-load but now I "hand-load".
    -- Well, at least I try --
    Reply With Quote
      #4  
    Unread 12-21-2009, 10:28 AM
    Platinum Member
     
    Join Date: Jul 2004
    Location: Texas
    Posts: 6,924
    Re: The basics when choosing a gun and a certain bullet to reload

    I would not recomend the 770 because as others have stated the barrels are pressed in
    and the locking lugs and the chamber are all in the barrel tenon and cant be re barreled
    if you ever wanted or needed to.

    You will have a very slim chance that it will shoot very good and if it doesn't your stuck.

    I am a big Remington fan and don't know why they would put out a rifle made this way
    except that it is cheaper to make .

    Go with any model that has a recoil lug between the action and barrel that you like but steer
    clear of the 770 !!!!!!!!!!.

    The recoil lug is a very important part of bedding and accurizing and even the cheepest
    SPS model has one and can be made to shoot.

    Just my opinion

    J E CUSTOM
    __________________
    "PRESS ON"
    Reply With Quote
      #5  
    Unread 12-21-2009, 10:49 AM
    Platinum Member
     
    Join Date: Feb 2006
    Location: az
    Posts: 3,168
    Re: The basics when choosing a gun and a certain bullet to reload

    don't wasteyer money get a 700. it has an adjustable trigger and locking lugs and.........
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: The basics when choosing a gun and a certain bullet to reload
    Thread Thread Starter Forum Replies Last Post
    300 RUM reload data 175gr Berger VLD hunting bullet northvalleyguide Reloading 0 10-18-2010 12:39 PM
    Choosing an allround 308W bullet Arcticrat Rifles, Bullets, Barrels & Ballistics 1 09-26-2010 06:00 PM
    Pick a moose bullet for reload GSoD Rifles, Bullets, Barrels & Ballistics 4 05-09-2008 04:31 PM
    Choosing a new bullet. 4ked Horn Rifles, Bullets, Barrels & Ballistics 7 08-08-2005 05:40 PM
    Handloading basics george Long Range Hunting & Shooting 2 10-19-2004 07:47 PM


    All times are GMT -5. The time now is 12:32 PM.


    Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC