Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Hunting > The Basics, Starting Out


aftermarket triggers?

LinkBack Thread Tools Display Modes
Unread 02-27-2009, 06:21 PM
Silver Member
Join Date: Mar 2008
Location: Helena, AR
Posts: 300
Re: aftermarket triggers?

I have a Jewell on a 204 that rides in the truck with me everyday on the farm. I have not had a problem with any debris yet. It has been in the truck with me for about 8 months.
Reply With Quote

Unread 02-28-2009, 12:42 AM
Platinum Member
Join Date: Jul 2004
Location: Texas
Posts: 7,235
Re: aftermarket triggers?

Originally Posted by .280fan View Post
J E Custom...or anyone else that has experience with Jewell triggers...how do you respond to those that say the Jewells are too sensitive...that if you get any piece of grit in them, they will malfunction.
Any GOOD trigger will some times act up when they are not taken care of.

There is something to be said for simple ,but simple triggers like the old savage or the
Winchester even tho they are very dependable they were not very adjustable.

The reason I didn't list some of the other Triggers like the Shillen was they are essentally
reworked remingtions and you might as well stick with the factory Remingtion trigger if it
can be adjusted properly.

Like johnnyK I to have adjusted a lot of remingtion triggers and most can be made to
perform very well but there have been a few that would not work consistantly the same.
so an aftermarket trigger was used.

Also after reading my original post It may have sounded like the rifle basic was no good.
this was not what I was trying to say but just that some after market triggers were not
that much better than the factory one ( they all should be better but how much bang for
your buck you would be getting).

As to the sensitivity of the Jewell . The only thing I find sensitive is the adjustments.
( A 1/2 turn on most trigger weight adjustments will change the weight by about 1/4 of
a pound, 1/8th of a turn on a jewell will do about the same.

I can't find anything that I do not like about the Jewell (Even the price considering the precision
workmanship,materals and design features). this is truely a case of "you get what you pay for"

For many years I would'nt use the Jewell because of the price Difference but now there
is not that big of a differance and once I tried one I was hooked.

I still use other triggers based on need and use but when I want the best you can guess
what I use.

Reply With Quote


Thread Tools
Display Modes

Similar Threads for: aftermarket triggers?
Thread Thread Starter Forum Replies Last Post
First Aftermarket Barrel backyardsniper Rifles, Bullets, Barrels & Ballistics 9 05-13-2011 12:01 PM
Remington triggers, set triggers??? Tikkamike Gunsmithing 2 10-06-2010 12:39 PM
Aftermarket Triggers for Browning A bolts and X bolts Rustystud Gunsmithing 4 11-15-2009 11:19 PM
Aftermarket stock for DBM M70 CBRADGO Rifles, Bullets, Barrels & Ballistics 3 06-17-2009 04:21 PM
AFTERMARKET TRIGGERS ??? Dennis_in_VA General Discussion 3 01-29-2007 11:25 AM

All times are GMT -5. The time now is 02:24 PM.

All content ©2010-2015 Long Range Hunting, LLC