WTS/WTT:Rem 700 Stainless Mag Bolt and 300 RUM Barrel with Hart Brake

[Bruz]

[ QUOTE ]
I talked with bruz about most of this a couple or three days ago and am pretty sure I can answer most of your questions.

It's a factory barrel that was chambered and had the snakeskin finish applied by RW Hart and the muzzle brake was put on at the same time too.

He told me that there were less than a hundred rounds through it but I can't for the life of me remember. I think it was 54 or something like that but am almost sure it was less than a hundred.

Note: You can see the Remington Stamped letters on the barrel in the picture so it's for sure a Remington blank/barrel.

I never did ask him if the brake is removeable but it sure doesn't look like it is.

I also don't know the barrel length.

Hope that helped... [img]/ubbthreads/images/graemlins/confused.gif[/img]

$bob$

[/ QUOTE ]

Bob,

Thanks for the help.I checked my messages from the seller and he stated 38 rounds and not 58 rounds which is what I told you. I haven't tried to remove the brake because I don't want to bugger it up and after looking at it with a scope..I don't believe it can be removed. This is definitely a factory Remington Barrel.

(Edited....I looked at the brake and don't believe that it can be removed...I will check with Hart on Monday)

Thanks,

[Joel Russo]

I might be able to shed some light on this for you.

I sold this barrel to Sam, the fellow that sold it to Bruz.

This was a factory take-off barrel chambered by Remington.

It was taken off by me.
It has a Hart break installed.
It did not have a thread protector
It had Three (3) rounds down it when I took it off.
It was taken off because the customer wanted a custom barrel.
I know the gentlemen that sold it to Bruz, and he is a stand up guy. If he said it has 38 rounds down it then it does.

Hope this helps for the prospective buyers.

[Bruz]

[ QUOTE ]
I might be able to shed some light on this for you.

I sold this barrel to Sam, the fellow that sold it to Bruz.

This was a factory take-off barrel chambered by Remington.

It was taken off by me.
It has a Hart break installed.
It did not have a thread protector
It had Three (3) rounds down it when I took it off.
It was taken off because the customer wanted a custom barrel.
I know the gentlemen that sold it to Bruz, and he is a stand up guy. If he said it has 38 rounds down it then it does.

Hope this helps for the prospective buyers.

[/ QUOTE ]

Mr. Russo,

Thanks for the history....Do you know if the brake can be removed? Sam said he thought it coul but I just looked at it and I'm not sure.

[LDHunter]

By golly... There's some history for you... Right back to the original owner.... [img]/ubbthreads/images/graemlins/grin.gif[/img]

I'm just scaling back from the loudenboomers due to my two torn retinas (fixed now) and rapidly fading hearing... <huh?> [img]/ubbthreads/images/graemlins/smirk.gif[/img]

I few years ago I'd have jumped on this way before it hit this list.

I imagine that the brake alone would cost more than he want's for the whole barrel.

Someone will get a good deal here.

My current long range rifle is a Sendero in 300SAUM and I'm quite happy with it but I miss the good ole days of the 30-378 and 338-378 rifles. [img]/ubbthreads/images/graemlins/confused.gif[/img]

I have a 375H&H I'm thinking of putting a brake on and using it for long range elk hunting but haven't worked up the nerve to send it off yet. [img]/ubbthreads/images/graemlins/frown.gif[/img]

Anyway. I'll vouch for Bruz... (I already said that huh?)

I have well over 3000 total posts on AR, 24hr Campfire and PM and am the veteran of over 200 internet transactions and I hope all that carries some weight. [img]/ubbthreads/images/graemlins/shocked.gif[/img]

Wish I could get the dang time to just shoot what I have NOW... That's the worst problem and I guess I share that with a lot of y'all.

OK... I'll quit rambling and let bruz sell his barrel.

Get to the hill!!!
$bob$

[Bruz]

*****SPF******

Thanks for all of the interest.

[treed]

the brake should be removable, I have a hart brake and barrel on my 300RUM and I have the threaded cap and wrench to get it off.

Travis