SOLD__DELETE PLEASE

jb1000br · #1 10-17-2003, 01:21 PM

700BDL long action (RH) bedded to McMillan MBR
- sako extractor
- Bedded in single shot ramp
- Side bolt release
- bolt is bushed in the rear and NP3 coated by robar (= rust-proof bolt handle)
- blueprinted
- Rifle Basix 2oz trigger
- Tubb Recoil Lug
- ALL ACTION WORK WAS DONE BY SID GOODLING

10 twist hart barrel (30”) chambered in 30 Hart by R.W.Hart & Son
Hart muzzle break
Bead blasted in snake-skin pattern by Hart
Likes 77.5 N165 with a 210 Berger and 210M primer @ 3000fps

Stock was wet sanded and auto clear-coated by my buddy’s Auto Body Shop (rides the bags like glass!!)
Drilled for front sling stud to attach bipod

The flag sticker on the butt-stock adds 100fps to any load of course 

Under 300rnds fired (including break in) ~ 290 without looking at my book

Includes 3-piece Redding custom die set (FL, NK, & seater) and a custom Wilson in-line seater

Right at about $2300 by my addition without tax

Gotta have myself a 6.5 heavy gun, and cant afford to keep and feed both, so unfortunately she’s gotta go -- $1500 plus shipping

WEIGHS 16.30 WITH LEUPOLD 8.5-25LRT WITH ANGLED BASE AND BURRIS ZEE RINGS

Jason Baney
814-383-4091
jb1000br@yahoo.com

Check my gallery for the pics—it’s the purple and white marbled one if you couldn’t figger that. [img]images/icons/grin.gif[/img] [img]images/icons/tongue.gif[/img]

BR GUN PICS

[ 10-23-2003: Message edited by: jb1000br ]

[ 10-28-2003: Message edited by: jb1000br ]

H-BAR · #2 10-18-2003, 11:24 PM

Hey Jay who's building your heavy gun?

jb1000br · #3 10-19-2003, 08:19 AM

Bill,
Harts or mark king--havnt decided yet--gotta sell this before i can do anything.

H-BAR · #4 10-19-2003, 11:06 PM

Jay I would go with Mark!!! I had him throat my gun so the bullets aren't in the donut area. Hopefully it will get rid of my fliers that I believe are being caused by velocity problems. I am going to have Mark build a 6.5-284 for me! Hey give me a call at 845-527-0860 or Email me at klntr@frontiernet.net
I learned a lot after having this gun built and hopefully won't make the same mistakes!
Tell your mom and Dad I said hello!!!

#5 10-22-2003, 09:31 AM

Save a headache go with Mark King!!!!
Ben there done that!!!!

good day!!! [img]images/icons/wink.gif[/img] [img]images/icons/wink.gif[/img] [img]images/icons/wink.gif[/img]

Boyd Heaton · #6 10-22-2003, 05:03 PM

Have Roger Foster build your 6.5.He did the chamber on my light and heavy gun.....He built Bald Eagle 713's 300wsm...And is building his 6.5 also.Once all the parts are in.He will have it done in 2 or 3 weeks tops

baldeagle713 · #7 10-22-2003, 07:10 PM

The only reason I don't have my 6.5 now is I told him to take his time. He did the 300WSM in short order. Even with all the extra instructions from myself. He did a grate job at getting the stock inletted and down to weight. [img]images/icons/grin.gif[/img]
I know I'll have it by christmas. I could have it by Halloween but I'm still playin with the "NightMare"