Fully custom Remington 700 chambered in 338 RUM, gun was built by Leavitt custom rifles in coeurd'alene Idaho.
here are the specs.
Remington 700 action, fully blueprinted.
Oversize recoil lug.
30 inch hart stainless barrel, 6 groove, 1-10 twist, magnum 1000 contour.
Defensive edge 4 port muzzle brake.
Tactical bolt knob.
HS precision stock (no palm swell).
Action has been bedded with acraglass.
Stock 700 trigger (not xmark) set around 3.5 lbs.
Extreme harcore gear 20 MOA base with built in level
Burris tactical 6 hole rings
leupold 6.5-20x50 long range. capped turrets, varmint hunter reticle.
butler creek flip up caps.
Weight of rifle is 12 lbs. 12.5 ounces on my scale.
Package also includes 80 pieces of nosler new factory seconds brass, still in the bags. as well as RCBS standard dies.
270 rounds fired total. shoots 300 SMK's in front of 89.0 grains of retumbo, cci 250 primers, in RP brass consistently at 1/2 MOA. when I can manage the recoil on a good day I can squeeze out 1/4 MOA.
3 things that you need to know about the gun: the bipod has made marks on the bottom of the stock, the cerakote has worn on the muzzle, and there is a few chips on the stock from where the gunsmith hogged out the barrel channel for such a large taper.
Shipping will be from my FFL to yours.
Certified check or USPS money order only. Check will need to clear before being shipped, my wife says this may take up to two weeks for it to clear, sorry I do this just to be safe!
$3300 for the whole package ready to hunt.
$2700 for rifle, base, rings, brass and dies.
$2400 for bare rifle.
Will not separate brass and dies until rifle has sold.
Please serious inquiries and offers only.
reason for selling is I am moving to a desert tech.