Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Free Classifieds - Buy or Sell > Guns For Sale

Guns For Sale List what you wish but keep it legal.


The thread is closed

modified stevens 200 .223, unfired

 
LinkBack Thread Tools Display Modes
  #1  
Old 01-20-2013, 10:59 AM
Junior Member
 
Join Date: Oct 2011
Posts: 12
modified stevens 200 .223, unfired

i bought this rifle brand new in may of 2012 with aspirations of building a 300 blackout with it. after having a group buy for the barrel i ordered fall through i am deciding to part ways. the rifle has never been fired and comes with all paper work and original boxes. a couple parts on the rifle have been modified and i tried to make the price reflect that. i tried to flute the bolt body and i screwed up the spacing on the front when going to the larger divots. for this reason i am basically subtracting the cost of a bolt body from what i would like to get from this otherwise brand new rifle. the bolt body will function fine as is and i also improved the cocking effort significantly by adding a bolt lift kit and also improving the cocking ramp; polished and made a little thinner to reduce friction. here is a link to a forum that discusses the benefits of the bolt lift kit: Bolt lift kit...this time with pictures - Page 4. the rifle currently has a sharp shooter supply competition trigger installed. the trigger is set up to break crisp and clean at 2.75lbs can go down to 12 ounces. i do have a 100 yard range we can sight it in here and i can also show someone or even tune trigger lighter if they come here to pick up. if interested in sighting it in and tunning trigger please bring some .223 ammo as i have none and do not plan on buying any.
i would like to sell the rifle complete as pictured but may part it out if i have too.
here is a parts break down:
rifle 330$
.250" recoil lug 20$ not installed
20 moa weaver rail 20$
utg 3-12x40ao mil dot reticle scope 70$
sss competition trigger 100$
reduced bolt lift kit 30$
oversized bolt handle 40$(i made it but figure it is reasonable number)
if i ship buyer will have to cover transfer fees and shipping. if interested i could try and sight the rifle in for someone at 100 yards with a particular ammo they plan on using. i use "try" as i do not know if i can get my hands on the ammo you would like to use. i would likely have the rifle dialed in very well in under 10 shots. i could also provide an approximate break down of what the mil dots on the scope reticle correspond to.

please email or call with additional questions: fishforlife@gmail.com 860-617-2925
- dave

i would like to get 500 shipped or 475 local pick up for everything.
images can be seen at the following links:


  #2  
Old 01-20-2013, 11:31 AM
Silver Member
 
Join Date: Feb 2012
Posts: 181
Re: modified stevens 200 .223, unfired

I'd probably buy it if I were in 'Merica, but I'm Canadian so I can't.

Everybody makes mistakes. I just wanted to say, it's nice to see somebody just admit and go "I goofed up"- especially online.

You, sir, have balls.
  #3  
Old 01-20-2013, 03:15 PM
Silver Member
 
Join Date: Oct 2010
Location: Michigan
Posts: 155
Re: modified stevens 200 .223, unfired

Action screw spacing?
  #4  
Old 01-23-2013, 05:58 AM
Junior Member
 
Join Date: Oct 2011
Posts: 12
Re: modified stevens 200 .223, unfired

Quote:
Originally Posted by SaskShooter View Post
.
i did not have the bolt body secured well plus to add insult to injury i also should have had the carbide bit shaft as short as possible to limit any deflection; lesson learned. i am happy i tried it even at the expense of making the rifle less desirable to most. if there is a next time, i am confident i can do it and keep it aesthetically correct as well.

Quote:
Originally Posted by grouse View Post
.
i just measured i the spacing with a digital caliper at about the 4.400.
i found a post mentioning it should be one of the following and it was only a couple thousands with my untrained eyes from 4.400; 4.275" Staggered feed short action Savage or Stevens
4.40" Centerfeed action Savage or Stevens

i assume it is then a centerfeed which makes sense as one has to load rounds in from the action port. if you have any other questions that might be more time sensitive i ask you to use the contacts i provided above otherwise it may take a day or two for me to make it back here.
thank you for your time.
The thread is closed

Bookmarks

Thread Tools
Display Modes


Current Poll
Do you archery hunt for elk?
YES - 31.35%
58 Votes
NO - 52.97%
98 Votes
Not yet, but I plan to. - 15.68%
29 Votes
Total Votes: 185
You may not vote on this poll.

All times are GMT -5. The time now is 12:51 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC