Looking for Oehler 35P

[Ian M]

Brent,
That above statement was clear as mud. I said - Seems that the more parallel to the flight of the bullet the screens are set, the lower the pairs of readings are.
What I meant was - Seems that the more parallel to the flight of the bullet the screens are set, the lower the difference between the pairs of readings.
In other words you might get 3125/3134 and if you adjust one screen you will get 3130/3134. Lots of times I can get the difference to hold at 3 or 4 fps or less consistently.

[Brent]

No, I understood you. [img]images/icons/wink.gif[/img]

I never thought of doing that. It makes perfect sense, I'll try it. Thanks for the tip. Velocity always fluctuates on the proof crony near zero, high and low. I just attributed it to the proof screen spacing being only 2 ft instead of 4, and just not as accurate. I did have one time it was high by about 30 fps but I didn't have the screw in the dimple on the rail all the way.

You'll have to post a pic of your tripod setup and steel target frame too. You have peaked my intrest.

I have the tripod adapter of Oehlers, but never have used it. The stands of theirs work fine for now.

take care,