Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Free Classifieds - Buy or Sell > Guns For Sale

Guns For Sale List what you wish but keep it legal.


Reply

Hart Rifle Barrels .308

 
LinkBack Thread Tools Display Modes
  #1  
Old 06-02-2013, 02:36 PM
Silver Member
 
Join Date: Dec 2010
Location: Eastern NC
Posts: 104
Hart Rifle Barrels .308

I built this rifle a couple years ago to shoot FTR. Found out it wasn't for me. Custom built .308 win on 700 action with less than 300 rounds fired. Barrel is 26 inch 1 in 10 twist, and shoots 175 very well. McMillan A-5 with adj. cheek. Jewell trigger, and glued in single shot follower. This rifle is not a repeater, but could be easily inletted for your preferred bottom metal. It has two studs up front and one stud in rear. I removed one of the front studs and the rear stud and have misplaced them. Action and barrel are teflon coated, very few handling marks.

$1500 shipped to your FFL
Attached Thumbnails - Click to View Larger
Hart Rifle Barrels .308-sell-034.jpg   Hart Rifle Barrels .308-sell-037.jpg  

Hart Rifle Barrels .308-sell-039.jpg   Hart Rifle Barrels .308-sell-040.jpg  

Reply With Quote
  #2  
Old 06-02-2013, 05:31 PM
Bronze Member
 
Join Date: Oct 2011
Posts: 50
Re: Hart Rifle Barrels .308

Quote:
Originally Posted by Birddog75 View Post
I built this rifle a couple years ago to shoot FTR. Found out it wasn't for me. Custom built .308 win on 700 action with less than 300 rounds fired. Barrel is 26 inch 1 in 10 twist, and shoots 175 very well. McMillan A-5 with adj. cheek. Jewell trigger, and glued in single shot follower. This rifle is not a repeater, but could be easily inletted for your preferred bottom metal. It has two studs up front and one stud in rear. I removed one of the front studs and the rear stud and have misplaced them. Action and barrel are teflon coated, very few handling marks.

$1500 shipped to your FFL
Who did the smith work?

Any trades?
Reply With Quote
  #3  
Old 06-02-2013, 06:17 PM
Silver Member
 
Join Date: Dec 2010
Location: Eastern NC
Posts: 104
Re: Hart Rifle Barrels .308

Hart Rifle Barrels did the smithing. Sorry no trades at this time.
Reply With Quote
  #4  
Old 06-03-2013, 06:44 PM
Silver Member
 
Join Date: Dec 2010
Location: Eastern NC
Posts: 104
Re: Hart Rifle Barrels .308

up.
Reply With Quote
  #5  
Old 06-05-2013, 11:50 PM
Silver Member
 
Join Date: Jan 2013
Location: Northern Idaho
Posts: 238
Re: Hart Rifle Barrels .308

I honestly can't speak for this particular rifle, but I've owned a Hart Rifle barreled Wby. Vanguard (Howa Action) in a fibermark stock converted to 7mm-08 Remington that will run circles around full custom guns! I sent them the rifle, they installed a #4 22" barrel, bedded the action flawlessly, installed a Timney trigger and it will shoot just about any hand load I work up under 3/8" -1/2" groups!
__________________
Cole

"Only accurate rifle are interesting" Col. Townsend Whelen
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes



All times are GMT -5. The time now is 12:16 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC