Custom Remington 700 in 300 Ultra

[cocked]

Custom Stainless remington 700 in 300 Ultra Mag.
Receiver has been squared, bolt and barrel lapped. Mounted in a HS Precision Thumbhole stock with Vias Muzzlebreak and timney trigger. This gun will shoot 200 grain bullets into one hole. I have it set up with Tally bases and a burris ballistic plex scope. Custom load developed to shoot out to 600 yards. Everything is in mint condition. The Gunsmith cost alone were over $1000.
I will sell the gun complete with scope bases, Dies, (Neck, seater and full) lots of 200 grain bullets. brass etc. for $1300 shipped in lower 48. This is a steal FOR SERIOUS BUYERS ONLY.. See photo below: NOTE: NO negotiating on the price and I am not interested in trades.

Daniel825@verizon.net
Click here for Photo:

http://i256.photobucket.com/albums/h...o/300ultra.jpg

[cocked]

This what comes with the gun:
RCBS 3 set 300 ultra dies: (Used only to load 50 rnds)
(191) 200 grain Sierra Match kings
(200) 200 grain Sierra Game kings
(109) 200 grain Nosler Partitions
(90) pieces of brass (50 are once fired... 40 new)

See items here:
http://i256.photobucket.com/albums/h...ultraacces.jpg

[cocked]

3 shots at 100 yards:
77 grains of IMR 4350
200 Grain Sierra Matchking

See photo here:
http://i256.photobucket.com/albums/h.../300target.jpg

[Lightvarmint]

Originally Posted by cocked

Custom Stainless remington 700 in 300 Ultra Mag.
Receiver has been squared, bolt and barrel lapped. Mounted in a HS Precision Thumbhole stock with Vias Muzzlebreak and timney trigger. This gun will shoot 200 grain bullets into one hole. I have it set up with Tally bases and a burris ballistic plex scope. Custom load developed to shoot out to 600 yards. Everything is in mint condition. The Gunsmith cost alone were over $1000.
I will sell the gun complete with scope bases, Dies, (Neck, seater and full) lots of 200 grain bullets. brass etc. for $1300 shipped in lower 48. This is a steal FOR SERIOUS BUYERS ONLY.. See photo below: NOTE: NO negotiating on the price and I am not interested in trades.

Daniel825@verizon.net
Click here for Photo:

http://i256.photobucket.com/albums/h...o/300ultra.jpg

Who did the work? What brand is the barrel? What is the barrel rifling twist rate? Thanks.

James

[cocked]

It is a factory barrel that was trued, lapped etc. from Accurate Arms.
Went through their accurizing program.