Re: Take Down Rifle, 308 win
Its not nessesary to mount on the bbl, the take down rifle locks up very tight, i bet your putting 10-15 ft pounds of torque on the bbl when you close the system.
I use a full thread system, HS uses a bayonet type- interupted thread system. I thought about using this system on mine, but i didn't want to mill out the precision threads i cut in the Ti Action, Ti dont like to be milled. It only takes about 20 seconds to screw on my barrel. The only draw back to doing it this way is you have to use a compact scope as the whole barrel and forarm have to rotate 360 deg, cant have any scope over hang. My adjusting ring is similar to the HS, but that is it. Im betting the gun will hold under 1 moa that is repeatable. You have to remember this particular rifle was built for short to med ranges, it will more than likely outshoot a factory rifle. The barrel weighs 1 pound with brake, so its a very light contour. Testing will tell the tale, i will post the groups when done. I am going to fire groups with taking the barrel off in between each shot.