close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Equipment Discussions

Reply

Separated Case Removal Tool

LinkBack Thread Tools Display Modes
  #8  
Unread 12-18-2003, 07:57 AM
Silver Member
 
Join Date: Apr 2003
Location: Newburgh NY
Posts: 235
Re: Separated Case Removal Tool

Doug if you use the glue method make sure none gets into the gun itself. The loctite Dantec mentioned should probably be used sparingly!!!!
Reply With Quote
  •   #9  
    Unread 01-09-2004, 10:55 PM
    Junior Member
     
    Join Date: Mar 2002
    Location: South Dakota
    Posts: 22
    Re: Separated Case Removal Tool

    If you can find a rat tailed file the right size,you can stick it inside the case,twist,lock it in the case and tap it out with a rod. SIZE MATTERS- scratching the throat is not a good thing.
    Reply With Quote

      #10  
    Unread 01-11-2004, 12:50 AM
    Bronze Member
     
    Join Date: May 2001
    Location: Arco, ID. USA
    Posts: 51
    Re: Separated Case Removal Tool

    Super Glue. Let dry 5 minutes and tap out.

    If you have the availability, shape (lathe turn, before the need) a wooden dowel. Insert with wet glue, let dry, and tap or pull out. This is for a real over pressure load.

    If it's just a case fatigue separation, as you described, then a tight fitting/oversize bore brush will work to dislodge the case.

    [ 01-11-2004: Message edited by: djd ]
    Reply With Quote
      #11  
    Unread 01-11-2004, 01:22 AM
    Bronze Member
     
    Join Date: May 2001
    Location: Arco, ID. USA
    Posts: 51
    Re: Separated Case Removal Tool

    Oh....and whether it's glue or Locktite, whatever "after effects" may be easily removed from a steel chamber.

    Unlike, the effects of a rat-tail file.

    [ 01-11-2004: Message edited by: djd ]
    Reply With Quote
      #12  
    Unread 01-11-2004, 03:55 PM
    Silver Member
     
    Join Date: Mar 2002
    Location: McNeal, AZ
    Posts: 368
    Re: Separated Case Removal Tool

    I use a .45 bore brush. Push it in, pull it out and go back to shooting. Takes longer to screw the brush on the rod, than it does to get the case out.
    __________________
    If I can kill that coyote from here, Will you walk out to get him?
    Reply With Quote
      #13  
    Unread 02-02-2004, 08:02 PM
    Platinum Member
     
    Join Date: Jan 2004
    Location: Blackfoot, Idaho
    Posts: 8,859
    Re: Separated Case Removal Tool

    Have one of the ECHOs mentioned above since 1966.

    Have never had to use it.

    Guess its like insurance.
    __________________
    I may be the slowest guy on the mountain . . . . but . . . . I'm on the mountain!
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: Separated Case Removal Tool
    Thread Thread Starter Forum Replies Last Post
    RCBS Case Master Gauging tool MTDOGGER Reloading Equipment and Components 2 07-20-2011 08:20 PM
    RCBS Case Master Concentricity Tool mike06 Reloading Equipment and Components 1 11-15-2010 06:33 AM
    Stuck case in die - which tool? tlk Reloading 4 07-16-2010 08:12 PM
    SPF: RCBS Case Master Concentricity Tool nad1967 Reloading Equipment and Components 1 04-15-2009 10:35 AM
    Sinclair Priming tool w/case lee e. jurras Guns For Sale 8 09-08-2004 06:25 PM


    All times are GMT -5. The time now is 09:14 PM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC