close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Equipment Discussions

Reply

Separated Case Removal Tool

LinkBack Thread Tools Display Modes
  #1  
Unread 12-14-2003, 06:47 PM
dwm dwm is offline
Gold Member
 
Join Date: Feb 2003
Location: Texas
Posts: 736
Separated Case Removal Tool

Hey, where can I buy a tool to remove cases that are stuck in the chamber when the heads come off?

What is the best tool and where can I buy one?

It has not happened yet, but I want to be prepared.

Doug
__________________
doug
Reply With Quote
  •   #2  
    Unread 12-15-2003, 07:51 AM
    Platinum Member
     
    Join Date: Jul 2003
    Location: Central PA
    Posts: 1,307
    Re: Separated Case Removal Tool

    I dont know of a tool, but a quick and dirty way is use a bore brush of the right size--stick it in till its half way past the chambe and reverse it--this should let you pull out the top half of the case.

    Also i have seen cerrosafe used to grab onto the top half of the case--then nock it out and the case comes with it.

    JB
    __________________
    Check it Out!!--> Shoot the Smack The Smiley Match...and help AmericanSnipers.org
    Reply With Quote

      #3  
    Unread 12-15-2003, 09:27 AM
    Silver Member
     
    Join Date: Dec 2001
    Location: Nanty-Glo, Pennsylvania
    Posts: 127
    Re: Separated Case Removal Tool

    dwm
    The ECHO Broken Shell Extractors are available from: W.J. Riebe Co.
    3434 Tucker Rd.
    Boise, Idaho 83703

    They are the old expanding collet design. If you are caught without one, twist a springy tree branch and shove it in and withdraw--it might or might not work.

    --Dan
    Reply With Quote
      #4  
    Unread 12-15-2003, 11:22 AM
    Silver Member
     
    Join Date: Dec 2001
    Location: Nanty-Glo, Pennsylvania
    Posts: 127
    Re: Separated Case Removal Tool

    dwm

    I should mention that the ECHO extractor is placed on the bolt face then inserted into chamber and withdrawn (with broken case).

    ---Dan
    Reply With Quote
      #5  
    Unread 12-15-2003, 11:06 PM
    Gold Member
     
    Join Date: Jan 2003
    Location: centre,alabama
    Posts: 948
    Re: Separated Case Removal Tool

    We have removed stuck cases by applying accuraglas to neck end of compatible case and inserting into the stuck case in chamber
    allow to dry and then pull both out with bolt.We found it is best to discard stressed brass to start with and the problem will be gone.
    Reply With Quote
      #6  
    Unread 12-16-2003, 04:38 AM
    Silver Member
     
    Join Date: Jul 2002
    Location: France
    Posts: 390
    Re: Separated Case Removal Tool

    I use a smaller case with loctite 648 , LOCTITE enjoy copper contact and cure in quick time after you get a need bottom and that easy to push the broken case with a rod

    Good shoting

    DAN TEC
    __________________
    DANTEC
    Reply With Quote
      #7  
    Unread 12-16-2003, 11:06 PM
    dwm dwm is offline
    Gold Member
     
    Join Date: Feb 2003
    Location: Texas
    Posts: 736
    Re: Separated Case Removal Tool

    Thanks guys, I was out at the range last weekend shooting the 25-06 and several of the fired cases came out just about split. Wanted to be prepared just in case ....

    End of life for them, tossed 'em all and am busy neck turning some more.

    Doug
    __________________
    doug
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: Separated Case Removal Tool
    Thread Thread Starter Forum Replies Last Post
    RCBS Case Master Gauging tool MTDOGGER Reloading Equipment and Components 2 07-20-2011 08:20 PM
    RCBS Case Master Concentricity Tool mike06 Reloading Equipment and Components 1 11-15-2010 06:33 AM
    Stuck case in die - which tool? tlk Reloading 4 07-16-2010 08:12 PM
    SPF: RCBS Case Master Concentricity Tool nad1967 Reloading Equipment and Components 1 04-15-2009 10:35 AM
    Sinclair Priming tool w/case lee e. jurras Guns For Sale 8 09-08-2004 06:25 PM


    All times are GMT -5. The time now is 10:18 AM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC