Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Equipment Discussions


scope receiver holes not square

LinkBack Thread Tools Display Modes
Unread 10-24-2013, 12:42 AM
Official LRH Sponsor
Join Date: May 2011
Location: Ventura CA
Posts: 1,106
Thank you for confirming that info. It really defeats the purpose of using Signature rings to have all the inserts the same thickness!

Bad news for us. While we haven't seen that problem in any of the Signature rings we've received before, now we have to pull every Signature ring out of the box and check the inserts. We carry a lot of them on stock. We will bring this issue up with Burris on our next restocking order.
Reply With Quote

Unread 10-24-2013, 04:53 AM
Gold Member
Join Date: Feb 2003
Location: Illinios
Posts: 564
Re: scope receiver holes not square

I run into the same problem with the inserts. In fact on one set of Zee Rings i ordered it had 1" inserts for 30mm rings. They should give more of thier business to the Chinese.
Reply With Quote
Unread 10-25-2013, 05:23 PM
Gold Member
Join Date: Dec 2012
Posts: 600
Re: scope receiver holes not square

These are correct.
Attached Thumbnails - Click to View Larger
scope receiver holes not square-20131025_172044.jpg   scope receiver holes not square-20131025_171438.jpg  

Reply With Quote


Thread Tools
Display Modes

All times are GMT -5. The time now is 11:28 AM.

Powered by vBulletin ©2000 - 2015, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2015 Long Range Hunting, LLC