Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Equipment Discussions


Remington Sendero 300 WM and Huskamaw Scope Ring Help

LinkBack Thread Tools Display Modes
Unread 04-29-2012, 10:39 PM
Bronze Member
Join Date: Jan 2012
Posts: 84
Remington Sendero 300 WM and Huskamaw Scope Ring Help

Does anyone know what kind of rings I should get for my 300 win mag Remington Sendero for a 5-20x50 Huskamaw scope. I went to Carters Country and at first they gave me leopold tall rings and I asked if they were sure they were tall enough. They said no they weren't sure, so they went to the back and got some leopold ultra tall rings and were about to send me out the door with ultra tall rings. I told them I wanted to get the shortest possible, so i brought the gun in to have them put them on. The sales guy brought it to the back with the ultra tall rings and didn't tell the gunsmith to try the shorter ones first until after I reminded him and the gunsmith was finished. They were quick to say it was the ultra tall was the best route. I didn't get a warm and fuzzy if it really was, or if the work was already done, so they were just trying to get me out the door. So, my sendero has ultra tall leopold rings for my scope. There is a fairly good gap between the scope and the barrel. Is this okay? Should I do something else? Any advise on what would be better would be appreciated. I'm just getting into long range shooting and do not want something as simple as rings to limit my accuracy.

Scope Specs:
BD 5-20x50 Scope

Total Length: 345.4mm
Eyepiece Length: 92.5mm
Objective Length: 110.7mm
Objective Diameter: 59mm
Eyepiece Diameter: 43.6mm
Tube Diameter: 30mm
Mounting Length: 142.2mm
Front Ring Space: 50.8mm
Rear Ring Space: 54.4mm

Reply With Quote
  •   #2  
    Unread 04-29-2012, 10:58 PM
    Silver Member
    Join Date: Feb 2012
    Location: Western Colorado
    Posts: 253
    Re: Remington Sendero 300 WM and Huskamaw Scope Ring Help

    59 mm = 2.32283 " that is the diameter of the objective in inches. Half of that is 1.161415" or the minimum height a ring would need to clear the barrel. If you add a one piece rail that the rings attach to you are going to add that height also.

    Rings 1 inch, plus a rail, minus half the diameter of the scope tube is about the minimum possible, no?

    Of course this all theory


    Last edited by jackem; 04-29-2012 at 11:20 PM. Reason: correction
    Reply With Quote

    Unread 05-01-2012, 01:56 AM
    Silver Member
    Join Date: Jan 2010
    Location: Western Pennsylvania
    Posts: 218
    Re: Remington Sendero 300 WM and Huskamaw Scope Ring Help

    You definitely want to get it down as low as comfortable. I've got a vortex sitting in warne medium 30mm rings on and egw 15moa base and still have plenty of clearance..
    There's no time quite like trigger time! .................................................. .................................................. .................../\.
    Reply With Quote


    Thread Tools
    Display Modes

    Similar Threads for: Remington Sendero 300 WM and Huskamaw Scope Ring Help
    Thread Thread Starter Forum Replies Last Post
    Huskamaw scope bstomper Long Range Scopes and Other Optics 12 10-12-2011 06:04 PM
    WTS Remington Sendero 300 Win Zeiss Scope- CLOSED HuntnID Guns For Sale 10 03-19-2011 10:45 PM
    Brand new huskamaw scope huntinfool18 Optics For Sale 3 05-02-2009 06:39 AM
    Remington 700 Sendero SF II scope dkweeks Long Range Scopes and Other Optics 10 06-03-2006 11:05 AM
    Need help mounting scope to remington sendero cbaker Long Range Scopes and Other Optics 2 05-16-2005 02:06 AM

    All times are GMT -5. The time now is 04:30 AM.

    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC